[DeTomaso] Trivial techno question: Slave cylinder mounting on the bellhousing
Charles Engles
cengles at cox.net
Sat Sep 3 10:04:24 EDT 2022
Dear Mike, Steven and Forest,
By Gum, after a good night’s rest and the clear light of morning, there in the orange parts manual, is the answer: Part #00050021 M8 x 1.25 x 20.
Thanks to all. Back to the Institute.
Warmest regards, Chuck Engles
From: MICHAEL DREW [mailto:mikeldrew at aol.com]
Sent: Friday, September 02, 2022 9:51 PM
To: Charles Engles
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Trivial techno question: Slave cylinder mounting on the bellhousing
Chuck,
Radical idea: look in the parts catalog. :)
If my cell service was better here I would look for you for all of them. But here is a start. :)
https://panterapartsusa.myshopify.com/products/05032a
Mike
Sent from my iPhone
On Sep 2, 2022, at 19:20, Charles Engles <cengles at cox.net> wrote:
Dear Forum,
The slave cylinder mount on the bellhousing has two small
bolts and one large one that secure the mount to the bellhousing. Are
those bolts metric or SAE? Whatever they are I am afraid the wrong
bolt was used for installation.
So, for re-tapping purposes tomorrow: Metric or SAE,
which is correct?
Thanks, Chuck Engles
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Dear Mike, Steven and Forest,
By Gum, after a good night's rest and the clear light
of morning, there in the orange parts manual, is the answer: Part
#00050021 M8 x 1.25 x 20.
Thanks to all. Back to the Institute.
Warmest regards, Chuck Engles
From: MICHAEL DREW [mailto:mikeldrew at aol.com]
Sent: Friday, September 02, 2022 9:51 PM
To: Charles Engles
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Trivial techno question: Slave cylinder
mounting on the bellhousing
Chuck,
Radical idea: look in the parts catalog. :)
If my cell service was better here I would look for you for all of
them. But here is a start. :)
[1]https://panterapartsusa.myshopify.com/products/05032a
Mike
Sent from my iPhone
On Sep 2, 2022, at 19:20, Charles Engles <cengles at cox.net> wrote:
Dear Forum,
The slave cylinder mount on the bellhousing has two small
bolts and one large one that secure the mount to the bellhousing.
Are
those bolts metric or SAE? Whatever they are I am afraid the wrong
bolt was used for installation.
So, for re-tapping purposes tomorrow: Metric or SAE,
which is correct?
Thanks, Chuck Engles
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://panterapartsusa.myshopify.com/products/05032a
More information about the DeTomaso
mailing list