[DeTomaso] Dome Light

Rich Hoppe richbhoppe at gmail.com
Thu Jun 9 10:20:38 EDT 2022


I think the switches provide the ground to the light.  I think a single power lead goes to the light.  If the power lead does not work, all switches will not make light work.  If one switch or line is grounded, the light will stay on.
Rich

Sent from my iPhone

> On Jun 8, 2022, at 11:28 PM, Larry Finch via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
> Sean,
> 
> There are two switches in the driver A pillar and one in the passenger A pillar.
> 
> There’s a single switch on the driver side that is part of the “key in ignition“ buzzer system. 
> 
> The other driver switch and the passenger switch are both connected to the dome light circuit. 
> 
> Hard to tell what your situation is other than you are missing some switches 
> 
> Larry 
> 
> 
> Sent from me using a magic, handheld electronic gizmo. 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.


More information about the DeTomaso mailing list