[DeTomaso] Best tool for AN fittings?

[Ken Green]

 They all seem to be aluminum, but I think they can still scratch the anodizing.  There are adjustable "crescent" type wrenches with wide surfaces that look like they may be better:
https://www.ebay.com/itm/153034140765
Then a good pair of vice jaws:
https://www.ebay.com/itm/353318714062
Just wondering if anyone has experience with similar tools.
Ken


   On Thursday, September 23, 2021, 01:43:06 PM PDT, James Coyne <tecnosound at hotmail.com> wrote:  
 
   It looks like all the special AN fitting wrenches are made out of
  aluminum.
    __________________________________________________________________

  From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
  Ken Green via DeTomaso <detomaso at server.detomasolist.com>
  Sent: Thursday, September 23, 2021 1:39 PM
  To: Detomaso List <detomaso at server.detomasolist.com>
  Subject: [DeTomaso] Best tool for AN fittings?

  Is there something that doesn't scratch the anodizing?
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   They all seem to be aluminum, but I think they can still scratch the
   anodizing.  There are adjustable "crescent" type wrenches with wide
   surfaces that look like they may be better:
   [1]https://www.ebay.com/itm/153034140765
   Then a good pair of vice jaws:
   [2]https://www.ebay.com/itm/353318714062
   Just wondering if anyone has experience with similar tools.
   Ken

   On Thursday, September 23, 2021, 01:43:06 PM PDT, James Coyne
   <tecnosound at hotmail.com> wrote:
     It looks like all the special AN fitting wrenches are made out of
     aluminum.
       __________________________________________________________________
     From: DeTomaso <[3]detomaso-bounces at server.detomasolist.com> on
   behalf of
     Ken Green via DeTomaso <[4]detomaso at server.detomasolist.com>
     Sent: Thursday, September 23, 2021 1:39 PM
     To: Detomaso List <[5]detomaso at server.detomasolist.com>
     Subject: [DeTomaso] Best tool for AN fittings?
     Is there something that doesn't scratch the anodizing?
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [6]DeTomaso at server.detomasolist.com
   [7]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.ebay.com/itm/153034140765
   2. https://www.ebay.com/itm/353318714062
   3. mailto:detomaso-bounces at server.detomasolist.com
   4. mailto:detomaso at server.detomasolist.com
   5. mailto:detomaso at server.detomasolist.com
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso