[DeTomaso] Clutch master cylinder seal

[Julian Kift]

CNC 907R-K was the kit that I purchased from Race Ready Products for a 3/4" Master, installed and fully functional.

Julian

________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Jeff Kimball <jgkrenton at comcast.net>
Sent: Monday, September 13, 2021 8:33 AM
To: Larry Weston <lplugw at hotmail.com>
Cc: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>; Larry Finch <fresnofinches at aol.com>
Subject: Re: [DeTomaso] Clutch master cylinder seal

Haven't yet..

J
> On 09/13/2021 8:26 AM Larry Weston <lplugw at hotmail.com> wrote:
>
>
> I have a CNC clutch master as well, also showing the black cloudiness of failing seals.
> Which repair kit part number did you decide to order?
> Thanks
>
> Sent from my iPhone
>
> > On Sep 13, 2021, at 11:04 AM, Jeff Kimball <jgkrenton at comcast.net> wrote:
> >
> >
> >> On 09/10/2021 2:25 PM Larry Finch via DeTomaso <detomaso at server.detomasolist.com> wrote:
> >>
> >>
> >> All,
> >>
> >> Thanks for providing the information on racereadyproducts.com, Julian.
> >>
> >> I just got off the telephone speaking with them to get a little clarification.
> >>
> >> What the Pantera community generally uses as a clutch master cylinder is also used as a brake master cylinder. Raceready lists them as brake Masters, but my phone call clarified the correct rebuild kits for our clutch master cylinders are in fact the “brake master” rebuild kits from raceready.
> >>
> >> Raceready has retained the original CNC part numbers for their kits; they just added a -K suffix.  They only contain the soft rubber components. Kits are in stock and can be ordered online.
> >>
> >> Larry
> >>
> >> Sent from me using a magic, handheld electronic gizmo.
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> DeTomaso at server.detomasolist.com
> >> http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> > <IMG_20210910_103752[1].jpg>
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> >
> > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   CNC 907R-K was the kit that I purchased from Race Ready Products for a
   3/4" Master, installed and fully functional.

   Julian
     __________________________________________________________________

   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
   Jeff Kimball <jgkrenton at comcast.net>
   Sent: Monday, September 13, 2021 8:33 AM
   To: Larry Weston <lplugw at hotmail.com>
   Cc: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>; Larry
   Finch <fresnofinches at aol.com>
   Subject: Re: [DeTomaso] Clutch master cylinder seal

   Haven't yet..
   J
   > On 09/13/2021 8:26 AM Larry Weston <lplugw at hotmail.com> wrote:
   >
   >
   > I have a CNC clutch master as well, also showing the black cloudiness
   of failing seals.
   > Which repair kit part number did you decide to order?
   > Thanks
   >
   > Sent from my iPhone
   >
   > > On Sep 13, 2021, at 11:04 AM, Jeff Kimball <jgkrenton at comcast.net>
   wrote:
   > >
   > >
   > >> On 09/10/2021 2:25 PM Larry Finch via DeTomaso
   <detomaso at server.detomasolist.com> wrote:
   > >>
   > >>
   > >> All,
   > >>
   > >> Thanks for providing the information on racereadyproducts.com,
   Julian.
   > >>
   > >> I just got off the telephone speaking with them to get a little
   clarification.
   > >>
   > >> What the Pantera community generally uses as a clutch master
   cylinder is also used as a brake master cylinder. Raceready lists them
   as brake Masters, but my phone call clarified the correct rebuild kits
   for our clutch master cylinders are in fact the "brake master" rebuild
   kits from raceready.
   > >>
   > >> Raceready has retained the original CNC part numbers for their
   kits; they just added a -K suffix.  They only contain the soft rubber
   components. Kits are in stock and can be ordered online.
   > >>
   > >> Larry
   > >>
   > >> Sent from me using a magic, handheld electronic gizmo.
   > >> _______________________________________________
   > >>
   > >>
   > >> Detomaso Email List is not managed by POCA
   > >> Posted emails must not exceed 1.5 Megabytes
   > >> DeTomaso mailing list
   > >> DeTomaso at server.detomasolist.com
   > >> [1]http://server.detomasolist.com/mailman/listinfo/detomaso
   > >>
   > >> To manage your subscription (change email address, unsubscribe,
   etc.) use the links above.
   > >>
   > >> Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.
   > > <IMG_20210910_103752[1].jpg>
   > > _______________________________________________
   > >
   > >
   > > Detomaso Email List is not managed by POCA
   > > Posted emails must not exceed 1.5 Megabytes
   > > DeTomaso mailing list
   > > DeTomaso at server.detomasolist.com
   > > [2]http://server.detomasolist.com/mailman/listinfo/detomaso
   > >
   > > To manage your subscription (change email address, unsubscribe,
   etc.) use the links above.
   > >
   > > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at server.detomasolist.com
   [3]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. http://server.detomasolist.com/mailman/listinfo/detomaso
   2. http://server.detomasolist.com/mailman/listinfo/detomaso
   3. http://server.detomasolist.com/mailman/listinfo/detomaso