[DeTomaso] Spark plug wire holders

[B Hower]

URL  takes you to photo of GM header and talks of Ford wiring ... 
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! ) 

    On Wednesday, November 3, 2021, 11:10:07 AM CDT, Jeff Kimball <jgkrenton at comcast.net> wrote:  
 
 One more time.  I think the last photo was too big and was stopped by the firewall.

Jeff
> On 11/03/2021 9:03 AM Jeff Kimball <jgkrenton at comcast.net> wrote:
> 
>  
> Charles:
> 
> I think it depends on how your exhaust fits, see photo.  I use these on my Twin Turbo Pantera on which the exhaust pretty much goes up (Thanks Lance) and there just isn't enough room for the ones that hold the wires vertically.  I suspect for most Panteras the vertical one is the best solution.
> 
> Also note that the plastic blocks that actually grip the wires will melt/distort if they get hot enough (don't ask me how I know...)  You can buy extra plastic blocks.  It might be a good idea to have a spare set.
> 
> As usual, your results may vary..
> 
> Jeff 2467.
> 
> > On 11/03/2021 3:09 AM charlesmccall at gmail.com wrote:
> > 
> >  
> > Hi all
> > 
> > I would like to buy some spark plug wire holders, similar to this: 
> > 
> > https://www.summitracing.com/parts/rnm-1106s/make/ford
> > 
> >  
> > 
> > (the reason I can't reuse my existing ones, Mile Drew, is because I only
> > have 1??)) 
> > 
> >  
> > 
> > There are two options available - one holds the wires horizontally, and one
> > holds them vertically. Interestingly, I think that the photos in Summit are
> > wrong, as it's the same picture for both styles. Which fits better on a
> > Cleveland in a Pantera? Horizontal or Vertical? I've tried browsing archived
> > photos but can't really tell so I thought I would ask. Vertical are
> > available now, but if I really want horizontal then they are backordered for
> > at least a month. 
> > 
> >  
> > 
> > Thank you!
> > 
> >    Hi all
> > 
> >    I would like to buy some spark plug wire holders, similar to this:
> > 
> >    [1]https://www.summitracing.com/parts/rnm-1106s/make/ford
> > 
> > 
> >    (the reason I can't reuse my existing ones, Mile Drew, is because I
> >    only have 1??))
> > 
> > 
> >    There are two options available - one holds the wires horizontally, and
> >    one holds them vertically. Interestingly, I think that the photos in
> >    Summit are wrong, as it's the same picture for both styles. Which fits
> >    better on a Cleveland in a Pantera? Horizontal or Vertical? I've tried
> >    browsing archived photos but can't really tell so I thought I would
> >    ask. Vertical are available now, but if I really want horizontal then
> >    they are backordered for at least a month.
> > 
> > 
> >    Thank you!
> > 
> > References
> > 
> >    1. https://www.summitracing.com/parts/rnm-1106s/make/ford
> > _______________________________________________
> > 
> > 
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> > 
> > To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> > 
> > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages._______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   URL  takes you to photo of GM header and talks of Ford wiring ...
   Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
   ! )

   On Wednesday, November 3, 2021, 11:10:07 AM CDT, Jeff Kimball
   <jgkrenton at comcast.net> wrote:
   One more time.  I think the last photo was too big and was stopped by
   the firewall.
   Jeff
   > On 11/03/2021 9:03 AM Jeff Kimball <[1]jgkrenton at comcast.net> wrote:
   >
   >
   > Charles:
   >
   > I think it depends on how your exhaust fits, see photo.  I use these
   on my Twin Turbo Pantera on which the exhaust pretty much goes up
   (Thanks Lance) and there just isn't enough room for the ones that hold
   the wires vertically.  I suspect for most Panteras the vertical one is
   the best solution.
   >
   > Also note that the plastic blocks that actually grip the wires will
   melt/distort if they get hot enough (don't ask me how I know...)  You
   can buy extra plastic blocks.  It might be a good idea to have a spare
   set.
   >
   > As usual, your results may vary..
   >
   > Jeff 2467.
   >
   > > On 11/03/2021 3:09 AM [2]charlesmccall at gmail.com wrote:
   > >
   > >
   > > Hi all
   > >
   > > I would like to buy some spark plug wire holders, similar to this:
   > >
   > > [3]https://www.summitracing.com/parts/rnm-1106s/make/ford
   > >
   > >
   > >
   > > (the reason I can't reuse my existing ones, Mile Drew, is because I
   only
   > > have 1??))
   > >
   > >
   > >
   > > There are two options available - one holds the wires horizontally,
   and one
   > > holds them vertically. Interestingly, I think that the photos in
   Summit are
   > > wrong, as it's the same picture for both styles. Which fits better
   on a
   > > Cleveland in a Pantera? Horizontal or Vertical? I've tried browsing
   archived
   > > photos but can't really tell so I thought I would ask. Vertical are
   > > available now, but if I really want horizontal then they are
   backordered for
   > > at least a month.
   > >
   > >
   > >
   > > Thank you!
   > >
   > >    Hi all
   > >
   > >    I would like to buy some spark plug wire holders, similar to
   this:
   > >
   > >    [1][4]https://www.summitracing.com/parts/rnm-1106s/make/ford
   > >
   > >
   > >    (the reason I can't reuse my existing ones, Mile Drew, is
   because I
   > >    only have 1??))
   > >
   > >
   > >    There are two options available - one holds the wires
   horizontally, and
   > >    one holds them vertically. Interestingly, I think that the
   photos in
   > >    Summit are wrong, as it's the same picture for both styles.
   Which fits
   > >    better on a Cleveland in a Pantera? Horizontal or Vertical? I've
   tried
   > >    browsing archived photos but can't really tell so I thought I
   would
   > >    ask. Vertical are available now, but if I really want horizontal
   then
   > >    they are backordered for at least a month.
   > >
   > >
   > >    Thank you!
   > >
   > > References
   > >
   > >    1. [5]https://www.summitracing.com/parts/rnm-1106s/make/ford
   > > _______________________________________________
   > >
   > >
   > > Detomaso Email List is not managed by POCA
   > > Posted emails must not exceed 1.5 Megabytes
   > > DeTomaso mailing list
   > > [6]DeTomaso at server.detomasolist.com
   > > [7]http://server.detomasolist.com/mailman/listinfo/detomaso
   > >
   > > To manage your subscription (change email address, unsubscribe,
   etc.) use the links above.
   > >
   > > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [8]DeTomaso at server.detomasolist.com
   [9]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:jgkrenton at comcast.net
   2. mailto:charlesmccall at gmail.com
   3. https://www.summitracing.com/parts/rnm-1106s/make/ford
   4. https://www.summitracing.com/parts/rnm-1106s/make/ford
   5. https://www.summitracing.com/parts/rnm-1106s/make/ford
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso
   8. mailto:DeTomaso at server.detomasolist.com
   9. http://server.detomasolist.com/mailman/listinfo/detomaso