[DeTomaso] Techno question: Koni shock bump stops
Julian Kift
julian_kift at hotmail.com
Sun Jun 27 11:10:31 EDT 2021
I'm pretty sure Marino is still active, but even if not, you are sending the shocks direct to Koni, not back to the point of purchase. Koni offer a rebuild service for a nominal amount even if you don't have the original receipt.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Frank Lisi <fjlisi at mediacombb.net>
Sent: Sunday, June 27, 2021 8:07 AM
To: Doug Braun <doug351c at gmail.com>; 'Charles Engles' <cengles at cox.net>; detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Techno question: Koni shock bump stops
Thanks Doug,
Unfortunately I purchased my shocks from Pantera East (Marino Perna) and I believe his Pantera business is no longer active.
If anybody knows that this is not true please let me know. Also if you can provide contact information that would be helpful.
Thanks
On 6/26/21, 2:59 PM, "Doug Braun" <doug351c at gmail.com> wrote:
Chuck and Frank,
AFIK, KONI shocks are lifetime guaranteed for the original purchaser. If you're fortunate enough to have kept your receipt, you can send the shock(s) to them and they'll not only replace the bump stop but also rebuild the shock to "like new". I had that done to one of mine that had failed but it was 15, or so, years ago.
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso On Behalf Of Frank Lisi
Sent: Saturday, June 26, 2021 11:15 AM
To: Charles Engles <cengles at cox.net>; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Techno question: Koni shock bump stops
Hi Chuck,
What a coincidence, I just started attempting to resolve my Konis' deteriorated crumbling bump stops. I found the replacement part on Amazon, (of all places) sold by a third party seller called Performance Guarantee (I believe they only sell through Amazon I could not find their direct web site)
The part number is Koni 71 34 42 000 0, two bump stops for $25.63. That said I am not sure this is the exact replacement part as my existing stops are deteriorated and any number indications are long gone. Once I receive the parts I will let you know.
BTW the thought of needing to disassemble and reassemble all four shocks does not excite me. I am willing to send them to a service to have the replacements installed, however I have not begun that search.
The Koni web site is https://www.koni-na.com/en-US/NorthAmerica/Products/Accessories/BumpRubbers/
Let me know what you find.
All the Best
Frank Lisi
On 6/25/21, 12:48 PM, "Charles Engles" <cengles at cox.net> wrote:
Dear Forum,
During a long sporty drive this week there was a new
squeaky/squealy noise from the right corner only during left turns at
more than 35 mph or so. I thought that the high positive caster had
resulted in the tire contacting the fender lip. I had solved that
problem over twenty years ago and I did not understand why it would
return.
Inspection showed no obvious fender contact on the tire nor
of tire contact on the fender. I removed the wheels and did not see
evidence for a leaky, failing Koni shock.
I did find that the bump stops, both right and left, look
they are well into crumbling deterioration. I think that the smaller
effective bump stop permitted more suspension travel which did allow
some tire-fender lip contact for brief periods.
It obviously happens, but I have not heard of failing bump
stops. I presume that this mundane failing part will require shock
removal to replace the bump stop? Has anyone else been down this
proverbial road?
Warmest regards, Chuck Engles
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I'm pretty sure Marino is still active, but even if not, you are
sending the shocks direct to Koni, not back to the point of purchase.
Koni offer a rebuild service for a nominal amount even if you don't
have the original receipt.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Frank Lisi <fjlisi at mediacombb.net>
Sent: Sunday, June 27, 2021 8:07 AM
To: Doug Braun <doug351c at gmail.com>; 'Charles Engles'
<cengles at cox.net>; detomaso at server.detomasolist.com
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Techno question: Koni shock bump stops
Thanks Doug,
Unfortunately I purchased my shocks from Pantera East (Marino Perna)
and I believe his Pantera business is no longer active.
If anybody knows that this is not true please let me know. Also if you
can provide contact information that would be helpful.
Thanks
On 6/26/21, 2:59 PM, "Doug Braun" <doug351c at gmail.com> wrote:
Chuck and Frank,
AFIK, KONI shocks are lifetime guaranteed for the original
purchaser. If you're fortunate enough to have kept your receipt, you
can send the shock(s) to them and they'll not only replace the bump
stop but also rebuild the shock to "like new". I had that done to one
of mine that had failed but it was 15, or so, years ago.
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso On Behalf Of Frank Lisi
Sent: Saturday, June 26, 2021 11:15 AM
To: Charles Engles <cengles at cox.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Techno question: Koni shock bump stops
Hi Chuck,
What a coincidence, I just started attempting to resolve my Konis'
deteriorated crumbling bump stops. I found the replacement part on
Amazon, (of all places) sold by a third party seller called Performance
Guarantee (I believe they only sell through Amazon I could not find
their direct web site)
The part number is Koni 71 34 42 000 0, two bump stops for $25.63.
That said I am not sure this is the exact replacement part as my
existing stops are deteriorated and any number indications are long
gone. Once I receive the parts I will let you know.
BTW the thought of needing to disassemble and reassemble all four
shocks does not excite me. I am willing to send them to a service to
have the replacements installed, however I have not begun that
search.
The Koni web site is
[1]https://www.koni-na.com/en-US/NorthAmerica/Products/Accessories/Bump
Rubbers/
Let me know what you find.
All the Best
Frank Lisi
On 6/25/21, 12:48 PM, "Charles Engles" <cengles at cox.net> wrote:
Dear Forum,
During a long sporty drive this week there was a
new
squeaky/squealy noise from the right corner only during
left turns at
more than 35 mph or so. I thought that the high positive
caster had
resulted in the tire contacting the fender lip. I had
solved that
problem over twenty years ago and I did not understand why
it would
return.
Inspection showed no obvious fender contact on
the tire nor
of tire contact on the fender. I removed the wheels and did
not see
evidence for a leaky, failing Koni shock.
I did find that the bump stops, both right and
left, look
they are well into crumbling deterioration. I think that
the smaller
effective bump stop permitted more suspension travel which
did allow
some tire-fender lip contact for brief periods.
It obviously happens, but I have not heard of
failing bump
stops. I presume that this mundane failing part will
require shock
removal to replace the bump stop? Has anyone else been
down this
proverbial road?
Warmest regards, Chuck Engles
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://www.koni-na.com/en-US/NorthAmerica/Products/Accessories/BumpRubbers/
2. http://server.detomasolist.com/mailman/listinfo/detomaso
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list