[DeTomaso] Clutch Slave Cylinder "Bell Crank"

[Mike Drew]

Larry,

Yes that looks right. 

While going to the shop and taking a photo is great, the nice thing is, my thousand words of typing were done while still relaxing in bed. :)

Mike

Sent from my iPad

> On Jan 21, 2021, at 09:42, Larry Stock <larrys at panteraparts.com> wrote:
> 
> I  use a photo reference to describe it best, save me the thousand words of typing
> Larry Stock
> 
> On 1/21/21, 9:09 AM, "DeTomaso on behalf of Frank Lisi" <detomaso-bounces at server.detomasolist.com on behalf of fjlisi at mediacombb.net> wrote:
> 
>       Hi All,
> 
> 
>       My question - can anyone provide guidance on the correct position of
>       the bell crank (according to the TSB article 88 it is called the
>       release lever on the cross shaft, it is part 7515 throw out bearing
>       lever)?
> 
> 
>       I needed to replace the slave cylinder and wanted to make sure that I
>       set it up correctly.  I read all that I found on setting up the slave
>       cylinder, but have not found any clear description on the bell crank's
>       correct position with reference to the slave cylinder.  I set the push
>       rod to the length as indicated in article 88, however I am not sure
>       that the lever is in the correct position.
> 
> 
>       Unfortunately I do not know the manufacturer or specification of the
>       clutch, I have not changed it since I purchased the car and it appears
>       to be in good working order.
> 
> 
>       Any guidance is greatly apricated.
> 
> 
>       Frank Lisi
> 
>       #06228
>    _______________________________________________
> 
> 
>    Detomaso Email List is not managed by POCA
>    Posted emails must not exceed 1.5 Megabytes
>    DeTomaso mailing list
>    DeTomaso at server.detomasolist.com
>    http://server.detomasolist.com/mailman/listinfo/detomaso
> 
>    To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
>    Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> 
> <05037P Clutch Slave Arm angle.jpg>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.