[DeTomaso] Undercarraige emblem
jderyke at aol.com
jderyke at aol.com
Tue Dec 21 23:23:46 EST 2021
No- that plaque is one of two that was originally GLUED to the sheet steel rocker covers in production by Ford/DeTomaso. The glue melted from heat from hot oil inside the covers, so many were lost. The fancy mounting plate system was made by Marino Perna of Pantera East decades ago, and copied by everyone. Before the mounting plates were available, I drilled 2 countersunk holes in a stock plaque and fastened it around the rear swaybar using Adel clips and 2 flat-head screws, with elastic stop-nuts. Going on 30 yrs and it hasn't fallen off yet. The one shown is behind the swaybar. Mine is in front of the swaybar, hanging from it.
-----Original Message-----
From: Matt <nwpantera at gmail.com>
To: DeTomaso Mail List <detomaso at server.detomasolist.com>
Sent: Tue, Dec 21, 2021 7:53 pm
Subject: [DeTomaso] Undercarraige emblem
Hey, just a quick question.A
Does anyone know if that rectangular emblem that says "Detomaso"A I see
commonly installed on the lower rear engineA casing a factory part? It
faces to the rear just below the sway bar.
Some cars have it and some don't.
Thanks, happy holidays folks!
Matt
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
No- that plaque is one of two that was originally GLUED to the sheet
steel rocker covers in production by Ford/DeTomaso. The glue melted
from heat from hot oil inside the covers, so many were lost. The fancy
mounting plate system was made by Marino Perna of Pantera East decades
ago, and copied by everyone. Before the mounting plates were available,
I drilled 2 countersunk holes in a stock plaque and fastened it around
the rear swaybar using Adel clips and 2 flat-head screws, with elastic
stop-nuts. Going on 30 yrs and it hasn't fallen off yet. The one shown
is behind the swaybar. Mine is in front of the swaybar, hanging from
it.
-----Original Message-----
From: Matt <nwpantera at gmail.com>
To: DeTomaso Mail List <detomaso at server.detomasolist.com>
Sent: Tue, Dec 21, 2021 7:53 pm
Subject: [DeTomaso] Undercarraige emblem
Hey, just a quick question.A
Does anyone know if that rectangular emblem that says "Detomaso"A I
see
commonly installed on the lower rear engineA casing a factory part?
It
faces to the rear just below the sway bar.
Some cars have it and some don't.
Thanks, happy holidays folks!
Matt
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list