[DeTomaso] Bushing removal tool

[Mike Drew]

At the other end of the spectrum, a blowtorch works too!

You can saw the large end of the bushing off, and then use a vice and appropriately sized deep well sockets (one small one large) and press them out. 

Mike

Sent from my iPad

> On Aug 29, 2021, at 09:19, steve at snclocks.com wrote:
> 
> I wrote an article on using a lathe - about the cleanest option I have seen.  But then, it does require a lathe.
> 
> Stephen Nelson
> -----Original Message-----
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Dennis Sanford via DeTomaso
> Sent: Sunday, August 29, 2021 9:01 AM
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] Bushing removal tool
> 
> 
> Does anyone know of a universal bushing removal tool that will work on our Pantera?
> 
> Dennis
> <08-27-2021 - upstairs 7.jpg>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.