[DeTomaso] Rear Wheel Bearing

[dennis617 at aol.com]

Any reason why I can't replace the entire assembly from an earlier year car.  Bob Levitt has extra complete assemblies for both sides from what he believes is a 73.  I have a 74 and I wasn't sure if there are any differences in the years.  It would certainly be easier to just swap out the entire assembly then trying to take it apart without the right tools.

Dennis
On Friday, September 25, 2020 Corey Price <coreyjprice at gmail.com> wrote:
I just went thru replacing my rear wheel bearings and axles. You should have a tin bearing protector plate thing there for type of bearings you have. In any case, I agree that it's a problem noticed before something bad could happen. An open bearing there probably won't last long!

Corey

> On Sep 25, 2020, at 2:22 PM, Joseph F Byrd, Jr <byrdjf at embarqmail.com> wrote:
> 
> "... know what's going on here?"  ----  a serious failure was avoided!
> 
> -----Original Message-----
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Dennis Sanford via DeTomaso
> Sent: Friday, September 25, 2020 3:48 PM
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] Rear Wheel Bearing
> 
> So I was under my car today just putting air in my tires, (I have those ridiculous air valves that are on the inside), and I looked up and saw this.  See attached.  Anyone know what's going on here, that I can see the inside of my wheel bearing?
> Dennis
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   Any reason why I can't replace the entire assembly from an earlier year
   car.  Bob Levitt has extra complete assemblies for both sides from what
   he believes is a 73.  I have a 74 and I wasn't sure if there are any
   differences in the years.  It would certainly be easier to just swap
   out the entire assembly then trying to take it apart without the right
   tools.

   Dennis
     __________________________________________________________________

   On Friday, September 25, 2020 Corey Price <coreyjprice at gmail.com>
   wrote:

   I just went thru replacing my rear wheel bearings and axles. You should
   have a tin bearing protector plate thing there for type of bearings you
   have. In any case, I agree that it's a problem noticed before something
   bad could happen. An open bearing there probably won't last long!
   Corey
   > On Sep 25, 2020, at 2:22 PM, Joseph F Byrd, Jr
   <[1]byrdjf at embarqmail.com> wrote:
   >
   > i>>?"... know what's going on here?"A  ----A  a serious failure was
   avoided!
   >
   > -----Original Message-----
   > From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> On
   Behalf Of Dennis Sanford via DeTomaso
   > Sent: Friday, September 25, 2020 3:48 PM
   > To: [3]detomaso at server.detomasolist.com
   > Subject: [DeTomaso] Rear Wheel Bearing
   >
   > So I was under my car today just putting air in my tires, (I have
   those ridiculous air valves that are on the inside), and I looked up
   and saw this.A  See attached.A  Anyone know what's going on here, that
   I can see the inside of my wheel bearing?
   > Dennis
   >
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > [4]DeTomaso at server.detomasolist.com
   > [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [6]DeTomaso at server.detomasolist.com
   [7]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:byrdjf at embarqmail.com
   2. mailto:detomaso-bounces at server.detomasolist.com
   3. mailto:detomaso at server.detomasolist.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso