[DeTomaso] Pedestal-puck-puck-mount or Pedestal-puck-mount-puck ?

Charles Engles cengles at cox.net
Tue Sep 1 17:08:19 EDT 2020


Dear Mike,

              I have just now visually confirmed the combination of pedestal-puck-engine mount-puck.  You're correct.

                          Warmest regards, Chuck Engles



-----Original Message-----
From: Mike Drew [mailto:MikeLDrew at aol.com] 
Sent: Tuesday, September 01, 2020 10:43 AM
To: Charles Engles
Cc: Mike Becker; List DeTomaso Forum; San Diego Panteras
Subject: Re: [DeTomaso] Pedestal-puck-puck-mount or Pedestal-puck-mount-puck ?

Chuck,

You just gave yourself some projects to tackle then. The proper arrangement is pedestal-puck-engine mount-puck. The engine mount is isolated above and below by the rubber pucks, and the bottom puck rests against the pedestal.  There is a large fender washer atop the upper puck, which spreads the load from the nut across the entire surface of the puck. 

Mike

Sent from my iPad

> On Sep 1, 2020, at 05:48, Charles Engles <cengles at cox.net> wrote:
> 
> Dear Mike,
> 
>            My recollection of multiple engine pulls and replacements on my
> two late-74 is:  Pedestal-puck-puck-mount.
> 
>                           Warmest regards, Chuck Engles
> 
> 
> 
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
> Of Mike Becker
> Sent: Monday, August 31, 2020 10:30 PM
> To: 'List DeTomaso Forum'; 'San Diego Panteras'
> Subject: [DeTomaso] Pedestal-puck-puck-mount or Pedestal-puck-mount-puck ?
> 
> Ok Experts,
> What is the correct configuration for the engine mount pucks?  Attached is a
> picture of my engine which has always had the setup as
> pedestal-puck-mount-pedestal, but I always questioned the puck being on
> top-side of the engine mount (it doesn't seem to serve any purpose in that
> position).  But I've seen other cars with the same odd configuration.  The
> tech manual, also attached, clearly shows both pucks go in between the
> pedestal and engine mount.  Which is the correct configuration?
> Mike Becker - 1741, San Diego
> 
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.



More information about the DeTomaso mailing list