[DeTomaso] aluminum stuck in file

[steve at snclocks.com]

OOPS – case!

 

Stephen Nelson

360-210-7295

Please note - I do not send or receive texts, but I do try to hear the phone when it rings, unless I am under a car or working in the wood shop.  Or at the gym.  e-mail is the best way to make sure I will find your message!

 

From: Ken Green <kenn_green at yahoo.com> 
Sent: Wednesday, November 25, 2020 8:52 AM
To: 'Rich Hoppe' <richbhoppe at gmail.com>; detomaso at detomasolist.com; steve at snclocks.com
Subject: Re: [DeTomaso] aluminum stuck in file

 

bullet or case?

 

On Tuesday, November 24, 2020, 3:57:03 PM PST, steve at snclocks.com <mailto:steve at snclocks.com>  <steve at snclocks.com <mailto:steve at snclocks.com> > wrote: 

 

 

Old rifle bullet work well, same principal.  But the brass is a little stiffer.

Stephen Nelson
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com <mailto:detomaso-bounces at server.detomasolist.com> > On Behalf Of Rich Hoppe
Sent: Tuesday, November 24, 2020 3:23 PM
To: detomaso at detomasolist.com <mailto:detomaso at detomasolist.com> 
Subject: [DeTomaso] aluminum stuck in file

Just wanted to pass on a new thing I learned today.
Many of you have probably already done this or similar.

My favorite file has had aluminum stuck in the teeth.
Nothing seemed to work to get it out.
I learned that you can take a piece of copper tubing and on one end open it up and make it flat.
Then you push the copper tubing back and forth  in line with the groves.
As the copper goes through it makes teeth in the copper  that line up with the groves of the file and pushes the aluminum out.



Made me happy.
Rich Hoppe

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com> 
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   OOPS - case!


   Stephen Nelson

   360-210-7295

   Please note - I do not send or receive texts, but I do try to hear the
   phone when it rings, unless I am under a car or working in the wood
   shop.  Or at the gym.  e-mail is the best way to make sure I will find
   your message!


   From: Ken Green <kenn_green at yahoo.com>
   Sent: Wednesday, November 25, 2020 8:52 AM
   To: 'Rich Hoppe' <richbhoppe at gmail.com>; detomaso at detomasolist.com;
   steve at snclocks.com
   Subject: Re: [DeTomaso] aluminum stuck in file


   bullet or case?


   On Tuesday, November 24, 2020, 3:57:03 PM PST, [1]steve at snclocks.com
   <[2]steve at snclocks.com> wrote:



   Old rifle bullet work well, same principal.  But the brass is a little
   stiffer.
   Stephen Nelson
   -----Original Message-----
   From: DeTomaso <[3]detomaso-bounces at server.detomasolist.com> On Behalf
   Of Rich Hoppe
   Sent: Tuesday, November 24, 2020 3:23 PM
   To: [4]detomaso at detomasolist.com
   Subject: [DeTomaso] aluminum stuck in file
   Just wanted to pass on a new thing I learned today.
   Many of you have probably already done this or similar.
   My favorite file has had aluminum stuck in the teeth.
   Nothing seemed to work to get it out.
   I learned that you can take a piece of copper tubing and on one end
   open it up and make it flat.
   Then you push the copper tubing back and forth  in line with the
   groves.
   As the copper goes through it makes teeth in the copper  that line up
   with the groves of the file and pushes the aluminum out.

   Made me happy.
   Rich Hoppe
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [5]DeTomaso at server.detomasolist.com
   [6]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:steve at snclocks.com
   2. mailto:steve at snclocks.com
   3. mailto:detomaso-bounces at server.detomasolist.com
   4. mailto:detomaso at detomasolist.com
   5. mailto:DeTomaso at server.detomasolist.com
   6. http://server.detomasolist.com/mailman/listinfo/detomaso