[DeTomaso] CHI 4V heads question

[Larry Finch]

Mike,

Something I failed to point out, and I think may be pertinent, is the gap shown is not a uniform gap. There is no gap at the bottom of the collector gasket in that photo. The two flanges meet at a distinct V angle. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 36896 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20200517/d7f8d7ed/attachment.jpeg>
-------------- next part --------------


I could see stacking two of the Remflex gaskets might close the gap at the top but would likely not compress enough at the bottom?????

Still waiting for wisdom on the adjustment range on the round donut gasket?s.

Thanks,

Larry 

Sent from me using a magic, handheld electronic gizmo. 

> On May 17, 2020, at 4:57 PM, Mike Drew <MikeLDrew at aol.com> wrote:
> 
> Larry,
> 
> I think my gap is at least twice that big. Easily handled with a pair of Remflex collector gaskets. 
> 
> You have highly unrealistic expectations I think.
> 
> Mike
> 
> Sent from my iPad
> 
>> On May 17, 2020, at 16:39, Larry Finch via DeTomaso <detomaso at server.detomasolist.com> wrote:
>> 
>> ?Picture?
>> 
>> <image1.jpeg>
>> 
>> 
>> 
>> 
>> Sent from me using a magic, handheld electronic gizmo. 
>> 
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>