[DeTomaso] Engine cover / nut dimensions
Mike Drew
MikeLDrew at aol.com
Thu May 7 21:17:55 EDT 2020
Bud,
Okay, now you’re just messing with me.
You originally said they were .550 x .557. Chuck said they were 1/2 x 1/2 which is probably measured with a ruler rather than a micrometer, and is very close to your measurements.
But overnight your nuts grew from .550 to .710 on each side???
Corey Price measured his and said his were .52 x .52.
I made three nuts last night, in the dark, outside, badly. :)
All of them are different from one another and all have measurements somewhere in between the various values I’ve been provided. They should be close enough to do the job. :)
Mike
Sent from my iPad
>> On May 7, 2020, at 14:52, B Hower <b.hower3400 at yahoo.com> wrote:
>
> Latest on NUTS,
>
> I just went to shop and pulled an engine cover nut from Lolita ( # 3400 ). The nut dimensions measure .710 x .710 x .200 but surface not perfect. Measures from .708 to .712 and .190 to .200 depending on just where you check.
>
> Some photos attached:
>
> Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )
>
>
> ----- Forwarded Message -----
> From: B Hower via DeTomaso <detomaso at server.detomasolist.com>
> To: Email List Address For Posting <detomaso at server.detomasolist.com>; Larry Finch <fresnofinches at aol.com>
> Sent: Thursday, May 7, 2020, 2:37:22 PM CDT
> Subject: Re: [DeTomaso] Engine cover
>
> For clarity .... I had to send a second email to explain that my note
> attached to the nut said Pantera NOT .... so actually I do not know
> where that nut came from .... I may be able to get one form 3400 as
> cover is off ... I think we got rained out of our farm yard tree clean
> up job .. So will later check on nuts installed in Lolita to see if I
> can get a true measurement. I am sorry for any confusion I may have
> caused.
> Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
> ! )
>
> On Thursday, May 7, 2020, 11:45:41 AM CDT, Larry Finch via DeTomaso
> <detomaso at server.detomasolist.com> wrote:
> Mike,
> In the archives, which is how I view the emails, is this email from
> Bud. Did you not receive this? As they say, perhaps check your spam or
> junk mailbox?
> Larry
> Sent from me using a magic, handheld electronic gizmo.
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. mailto:DeTomaso at server.detomasolist.com
> 2. http://server.detomasolist.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> <DSC02891.JPG>
> <DSC02897.JPG>
-------------- next part --------------
Bud,
Okay, now you're just messing with me.
You originally said they were .550 x .557. Chuck said they were 1/2 x
1/2 which is probably measured with a ruler rather than a micrometer,
and is very close to your measurements.
But overnight your nuts grew from .550 to .710 on each side???
Corey Price measured his and said his were .52 x .52.
I made three nuts last night, in the dark, outside, badly. :)
All of them are different from one another and all have measurements
somewhere in between the various values I've been provided. They should
be close enough to do the job. :)
Mike
Sent from my iPad
On May 7, 2020, at 14:52, B Hower <b.hower3400 at yahoo.com> wrote:
Latest on NUTS,
I just went to shop and pulled an engine cover nut from Lolita ( # 3400
). The nut dimensions measure .710 x .710 x .200 but surface not
perfect. Measures from .708 to .712 and .190 to .200 depending on just
where you check.
Some photos attached:
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
! )
----- Forwarded Message -----
From: B Hower via DeTomaso <detomaso at server.detomasolist.com>
To: Email List Address For Posting <detomaso at server.detomasolist.com>;
Larry Finch <fresnofinches at aol.com>
Sent: Thursday, May 7, 2020, 2:37:22 PM CDT
Subject: Re: [DeTomaso] Engine cover
For clarity .... I had to send a second email to explain that my note
attached to the nut said Pantera NOT .... so actually I do not know
where that nut came from .... I may be able to get one form 3400 as
cover is off ... I think we got rained out of our farm yard tree
clean
up job .. So will later check on nuts installed in Lolita to see if I
can get a true measurement. I am sorry for any confusion I may have
caused.
Bud #3400 ( Drive it like there is no tomorrow -- for there may not
be
! )
On Thursday, May 7, 2020, 11:45:41 AM CDT, Larry Finch via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
Mike,
In the archives, which is how I view the emails, is this email from
Bud. Did you not receive this? As they say, perhaps check your spam
or
junk mailbox?
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1][2]DeTomaso at server.detomasolist.com
[2][3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. mailto:[4]DeTomaso at server.detomasolist.com
2. [5]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at server.detomasolist.com
[7]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
<DSC02891.JPG>
<DSC02897.JPG>
References
1. mailto:detomaso at server.detomasolist.com
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. mailto:DeTomaso at server.detomasolist.com
7. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list