[DeTomaso] Working on dual MC conversion like Goran (Hemi Pantera) did, Anyone have ideas?

Ken Green kenn_green at yahoo.com
Fri Mar 20 01:00:10 EDT 2020 

 I'm reluctant to make room for the clutch MC.  It looks like some of the stiffening structure is behind the fender wall that has to be substantially dented?
Ken

    On Thursday, March 19, 2020, 7:29:15 PM PDT, Will Kooiman <will.kooiman at gmail.com> wrote:  
 
 I have Wilwood pedals with a balance bar.

I initially made a plate from 1/4” plate mild steel.  It’s not that
difficult with a hole saw and a mig.

The last time I had it apart, I remade it in 6061-T6.

I’m very happy with it.  I need to take it apart one more time to polish
and clear coat it.

I am not a fabricator, but I have stayed in a Holiday Inn Express.

On 3/19/20, 10:14 PM, "DeTomaso on behalf of Mike Drew via DeTomaso"
<detomaso-bounces at server.detomasolist.com on behalf of
detomaso at server.detomasolist.com> wrote:

>Ken,
>
>Pantera Performance Center sells a bolt-in dual master setup, either with
>or without booster.
>
>There are some things (glass, tires) one doesn’t bother trying to make
>oneself. This is approaching that level IMHO.....
>
>MIKE
>
>Sent from my iPad
>
>> On Mar 19, 2020, at 14:36, Ken Green via DeTomaso
>><detomaso at server.detomasolist.com> wrote:
>> 
>>   I did a first cut with a junk pedal assembly and am ready to use a
>>  better one.  A 1 inch ID tube was welded into the pedal to attach the
>>  balance bar, and a plate sandwiched between the MCs and pedal box
>>  casting to mount the dual MCs.
>>  It's pretty simple and compact.  If anyone is considering this, we can
>>  compare notes?  I can email photos of the prototype.
>>  Ken
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.)
>>use the links above.
>> 
>> Members who post to this list grant license to the list to forward any
>>message posted here to all past, current, or future members of the list.
>>They also grant the list owner permission to maintain an archive or
>>approve the archiving of list messages.
>
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.


_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   I'm reluctant to make room for the clutch MC.  It looks like some of
   the stiffening structure is behind the fender wall that has to be
   substantially dented?
   Ken

   On Thursday, March 19, 2020, 7:29:15 PM PDT, Will Kooiman
   <will.kooiman at gmail.com> wrote:
   I have Wilwood pedals with a balance bar.
   I initially made a plate from 1/4a plate mild steel.  Itas not that
   difficult with a hole saw and a mig.
   The last time I had it apart, I remade it in 6061-T6.
   Iam very happy with it.  I need to take it apart one more time to
   polish
   and clear coat it.
   I am not a fabricator, but I have stayed in a Holiday Inn Express.
   On 3/19/20, 10:14 PM, "DeTomaso on behalf of Mike Drew via DeTomaso"
   <[1]detomaso-bounces at server.detomasolist.com on behalf of
   [2]detomaso at server.detomasolist.com> wrote:
   >Ken,
   >
   >Pantera Performance Center sells a bolt-in dual master setup, either
   with
   >or without booster.
   >
   >There are some things (glass, tires) one doesnat bother trying to make
   >oneself. This is approaching that level IMHO.....
   >
   >MIKE
   >
   >Sent from my iPad
   >
   >> On Mar 19, 2020, at 14:36, Ken Green via DeTomaso
   >><[3]detomaso at server.detomasolist.com> wrote:
   >>
   >> i>>?  I did a first cut with a junk pedal assembly and am ready to
   use a
   >>  better one.  A 1 inch ID tube was welded into the pedal to attach
   the
   >>  balance bar, and a plate sandwiched between the MCs and pedal box
   >>  casting to mount the dual MCs.
   >>  It's pretty simple and compact.  If anyone is considering this, we
   can
   >>  compare notes?  I can email photos of the prototype.
   >>  Ken
   >> _______________________________________________
   >>
   >>
   >> Detomaso Email List is not managed by POCA
   >> Posted emails must not exceed 1.5 Megabytes
   >> DeTomaso mailing list
   >> [4]DeTomaso at server.detomasolist.com
   >> [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   >>
   >> To manage your subscription (change email address, unsubscribe,
   etc.)
   >>use the links above.
   >>
   >> Members who post to this list grant license to the list to forward
   any
   >>message posted here to all past, current, or future members of the
   list.
   >>They also grant the list owner permission to maintain an archive or
   >>approve the archiving of list messages.
   >
   >_______________________________________________
   >
   >
   >Detomaso Email List is not managed by POCA
   >Posted emails must not exceed 1.5 Megabytes
   >DeTomaso mailing list
   >[6]DeTomaso at server.detomasolist.com
   >[7]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   >To manage your subscription (change email address, unsubscribe, etc.)
   use
   >the links above.
   >
   >Members who post to this list grant license to the list to forward any
   >message posted here to all past, current, or future members of the
   list.
   >They also grant the list owner permission to maintain an archive or
   >approve the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [8]DeTomaso at server.detomasolist.com
   [9]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:detomaso-bounces at server.detomasolist.com
   2. mailto:detomaso at server.detomasolist.com
   3. mailto:detomaso at server.detomasolist.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso
   8. mailto:DeTomaso at server.detomasolist.com
   9. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list