[DeTomaso] Clutch Throwout Finger Bracket / Snout Needed

[Julian Kift]

Worth a call, but I seem to recall a prior thread that said he no longer had any as he later used that large stash converting back to regular throw out, when the hydraulics went out of favor!

Julian

________________________________
From: Mike Drew <MikeLDrew at aol.com>
Sent: Monday, March 9, 2020 8:00 PM
To: Julian Kift <julian_kift at hotmail.com>
Cc: Mike & Elizabeth Thomas <mbefthomas2 at gmail.com>; Joseph F Byrd, Jr <byrdjf at embarqmail.com>; detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed

Dennis did a lot of hydraulic bearing conversions back in the day and likely has these forks coming out of his ears!

Mike

Sent from my iPad

> On Mar 9, 2020, at 19:41, Julian Kift <julian_kift at hotmail.com> wrote:
>
>    I believe I have a bearing carrier stashed somewhere, operative word
>   being 'somewhere'! I seem to recall letting the fork, bar and spring
>   parts go to someone who was converting back from a hydraulic throw-out.
>
>   Wilkinson lists the fork for $124 new, direct from Lloyd might be
>   cheaper.
>
>   Julian
>     __________________________________________________________________
>
>   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
>   Mike & Elizabeth Thomas <mbefthomas2 at gmail.com>
>   Sent: Monday, March 9, 2020 7:07 PM
>   To: 'Joseph F Byrd, Jr' <byrdjf at embarqmail.com>;
>   detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
>   Subject: Re: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed
>
>   It is curved but worn.  As you can see from the other attached photo
>   the
>   wear to the throwout bearing ears has a concave wear area which matches
>   the
>   convex of the clutch fingers.  As you can also see from this and the
>   previous pic, the wear was not even from side to side to the TO bearing
>   was
>   cocking as well while it was trying to move, likely indicating is was
>   binding on the snout.
>   Mike
>   Our email address has changed: Please use mbefthomas2 at gmail.com for all
>   new
>   messages, thanks!
>   -----Original Message-----
>   From: Joseph F Byrd, Jr <byrdjf at embarqmail.com>
>   Sent: Monday, March 9, 2020 6:19 PM
>   To: 'Mike & Elizabeth Thomas' <mbefthomas2 at gmail.com>;
>   detomaso at server.detomasolist.com
>   Subject: RE: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed
>   Sorry, but the nature from my past life makes me want to analyze
>   everything
>   .  So. . .
>   Is that wear truly flat, or does it indicate the contact travels over
>   that
>   length?
>   Joe
>   -----Original Message-----
>   From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of
>   Mike
>   & Elizabeth Thomas
>   Sent: Monday, March 9, 2020 6:41 PM
>   To: detomaso at server.detomasolist.com
>   Subject: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed
>   I am in need of a ZF clutch throwout bearing finger bracket and snout.
>   I've
>   damaged mine with insufficient lube and our local ZF specialist said he
>   would rather put in a replacement finger bracket than try to weld and
>   grind
>   the damaged one to the right curve, etc.  The snout is also scored and
>   may
>   be able to be buffed up but a fresh one would be a better idea,
>   according to
>   Bryon.  I've attached a pic of the fingers so you can bear witness to
>   my DA
>   moment.
>
>   I've also pinged Quella and Lloyd Butfoy but thought I'd put it out to
>   all
>   y'all as well.
>
>   Thanks in advance!
>   Mike Thomas
>
>
>   Our email address has changed: Please use mbefthomas2 at gmail.com
>   <[1]mailto:mbefthomas2 at gmail.com>  for all new messages, thanks!
>
> References
>
>   1. mailto:mbefthomas2 at gmail.com
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   Worth a call, but I seem to recall a prior thread that said he no
   longer had any as he later used that large stash converting back to
   regular throw out, when the hydraulics went out of favor!

   Julian
     __________________________________________________________________

   From: Mike Drew <MikeLDrew at aol.com>
   Sent: Monday, March 9, 2020 8:00 PM
   To: Julian Kift <julian_kift at hotmail.com>
   Cc: Mike & Elizabeth Thomas <mbefthomas2 at gmail.com>; Joseph F Byrd, Jr
   <byrdjf at embarqmail.com>; detomaso at server.detomasolist.com
   <detomaso at server.detomasolist.com>
   Subject: Re: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed

   Dennis did a lot of hydraulic bearing conversions back in the day and
   likely has these forks coming out of his ears!
   Mike
   Sent from my iPad
   > On Mar 9, 2020, at 19:41, Julian Kift <julian_kift at hotmail.com>
   wrote:
   >
   >    I believe I have a bearing carrier stashed somewhere, operative
   word
   >   being 'somewhere'! I seem to recall letting the fork, bar and
   spring
   >   parts go to someone who was converting back from a hydraulic
   throw-out.
   >
   >   Wilkinson lists the fork for $124 new, direct from Lloyd might be
   >   cheaper.
   >
   >   Julian
   >
   __________________________________________________________________
   >
   >   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
   of
   >   Mike & Elizabeth Thomas <mbefthomas2 at gmail.com>
   >   Sent: Monday, March 9, 2020 7:07 PM
   >   To: 'Joseph F Byrd, Jr' <byrdjf at embarqmail.com>;
   >   detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
   >   Subject: Re: [DeTomaso] Clutch Throwout Finger Bracket / Snout
   Needed
   >
   >   It is curved but worn.  As you can see from the other attached
   photo
   >   the
   >   wear to the throwout bearing ears has a concave wear area which
   matches
   >   the
   >   convex of the clutch fingers.  As you can also see from this and
   the
   >   previous pic, the wear was not even from side to side to the TO
   bearing
   >   was
   >   cocking as well while it was trying to move, likely indicating is
   was
   >   binding on the snout.
   >   Mike
   >   Our email address has changed: Please use mbefthomas2 at gmail.com for
   all
   >   new
   >   messages, thanks!
   >   -----Original Message-----
   >   From: Joseph F Byrd, Jr <byrdjf at embarqmail.com>
   >   Sent: Monday, March 9, 2020 6:19 PM
   >   To: 'Mike & Elizabeth Thomas' <mbefthomas2 at gmail.com>;
   >   detomaso at server.detomasolist.com
   >   Subject: RE: [DeTomaso] Clutch Throwout Finger Bracket / Snout
   Needed
   >   Sorry, but the nature from my past life makes me want to analyze
   >   everything
   >   .  So. . .
   >   Is that wear truly flat, or does it indicate the contact travels
   over
   >   that
   >   length?
   >   Joe
   >   -----Original Message-----
   >   From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf
   Of
   >   Mike
   >   & Elizabeth Thomas
   >   Sent: Monday, March 9, 2020 6:41 PM
   >   To: detomaso at server.detomasolist.com
   >   Subject: [DeTomaso] Clutch Throwout Finger Bracket / Snout Needed
   >   I am in need of a ZF clutch throwout bearing finger bracket and
   snout.
   >   I've
   >   damaged mine with insufficient lube and our local ZF specialist
   said he
   >   would rather put in a replacement finger bracket than try to weld
   and
   >   grind
   >   the damaged one to the right curve, etc.  The snout is also scored
   and
   >   may
   >   be able to be buffed up but a fresh one would be a better idea,
   >   according to
   >   Bryon.  I've attached a pic of the fingers so you can bear witness
   to
   >   my DA
   >   moment.
   >
   >   I've also pinged Quella and Lloyd Butfoy but thought I'd put it out
   to
   >   all
   >   y'all as well.
   >
   >   Thanks in advance!
   >   Mike Thomas
   >
   >
   >   Our email address has changed: Please use mbefthomas2 at gmail.com
   >   <[1]mailto:mbefthomas2 at gmail.com>  for all new messages, thanks!
   >
   > References
   >
   >   1. [1]mailto:mbefthomas2 at gmail.com
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > DeTomaso at server.detomasolist.com
   > [2]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:mbefthomas2 at gmail.com
   2. http://server.detomasolist.com/mailman/listinfo/detomaso