[DeTomaso] Brake Master Cylinder Issue
Bill Cartus
bcartus at yahoo.com
Wed Mar 4 16:32:22 EST 2020
Mike,
You are correct regarding the front and rear circuits having a different bore! I'm headed to the parts houses soon to see if I can get a match with a chevy part! Appreciate to followup and confirmation to Sean's reply.
Bill
On Wednesday, March 4, 2020, 04:17:32 PM EST, Mike Drew <mikeldrew at aol.com> wrote:
It's from Precision Proformance (Bobby Byars RIP). It's a Chevy master and red rolled stock booster assembly. He also offered a slightly smaller aftermarket booster.
In any case, the master is generic Chevy. I think it's a step-bore design, where the front and rear circuits use a different piston/bore diameter?
Mike
Sent from my iPhone
> On Mar 4, 2020, at 10:27, Sean Korb <spkorb at gmail.com> wrote:
>
> I'm not sure but I think that is a Pantera Performance part, which is
> a redrilled booster and master from a full size Chevrolet van. You
> might be able to grab the casting number off the master and get a
> replacement from AutoZone or RockAuto or NAPA.
>
>> On 3/4/20, Bill Cartus via DeTomaso <detomaso at server.detomasolist.com> wrote:
>> My brake master cylinder was leaking so I took it off. I can easily see
>> that the problem is the larger rubber 'o-ring' has a small crimp in it
>> (not sure how it was even working unless the rear portion was doing
>> most of the work), but it appears no one sells a repair kit (per
>> Wilkinson rep I talked with). I can't see spending $289 for a whole new
>> master cylinder when a $1 part will take car of it. Does anyone know
>> where I can get these parts? Has anyone used an after market unit from
>> Summit Racing (as an example) replacing the tandem unit attached to the
>> booster? I have a 1972 car and assume it has an Italian factory
>> replacement unit from around 2016. Attaching a small pic below. All
>> advice appreciated.
>> Thanks,
>> Bill Cartus #3633.
>
>
> --
> Sean Korb spkorb at gmail.com http://spkorb.org (est 1994)
> "Computers are useless. They can only give you answers." -P. Picasso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Mike,
You are correct regarding the front and rear circuits having a
different bore! I'm headed to the parts houses soon to see if I can
get a match with a chevy part! Appreciate to followup and confirmation
to Sean's reply.
Bill
On Wednesday, March 4, 2020, 04:17:32 PM EST, Mike Drew
<mikeldrew at aol.com> wrote:
It's from Precision Proformance (Bobby Byars RIP). It's a Chevy master
and red rolled stock booster assembly. He also offered a slightly
smaller aftermarket booster.
In any case, the master is generic Chevy. I think it's a step-bore
design, where the front and rear circuits use a different piston/bore
diameter?
Mike
Sent from my iPhone
> On Mar 4, 2020, at 10:27, Sean Korb <[1]spkorb at gmail.com> wrote:
>
> I'm not sure but I think that is a Pantera Performance part, which is
> a redrilled booster and master from a full size Chevrolet van. You
> might be able to grab the casting number off the master and get a
> replacement from AutoZone or RockAuto or NAPA.
>
>> On 3/4/20, Bill Cartus via DeTomaso
<[2]detomaso at server.detomasolist.com> wrote:
>> My brake master cylinder was leaking so I took it off. I can easily
see
>> that the problem is the larger rubber 'o-ring' has a small crimp in
it
>> (not sure how it was even working unless the rear portion was doing
>> most of the work), but it appears no one sells a repair kit (per
>> Wilkinson rep I talked with). I can't see spending $289 for a whole
new
>> master cylinder when a $1 part will take car of it. Does anyone
know
>> where I can get these parts? Has anyone used an after market unit
from
>> Summit Racing (as an example) replacing the tandem unit attached to
the
>> booster? I have a 1972 car and assume it has an Italian factory
>> replacement unit from around 2016. Attaching a small pic below.
All
>> advice appreciated.
>> Thanks,
>> Bill Cartus #3633.
>
>
> --
> Sean Korb [3]spkorb at gmail.com [4]http://spkorb.org (est 1994)
> "Computers are useless. They can only give you answers." -P. Picasso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [5]DeTomaso at server.detomasolist.com
> [6]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:spkorb at gmail.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:spkorb at gmail.com
4. http://spkorb.org/
5. mailto:DeTomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list