[DeTomaso] Reverse Gear

[Jeff Cobb]

Loose u-joint kills shaft rotation movement and shaft is out of its correct range of movement adjustment
and or your shift shaft supports are not tight.
So your rotation energy is being wasted before your rvs gear.

Jeff
On Jun 28, 2020, at 4:04 PM, steve at snclocks.com wrote:

> We went to a cars and coffee yesterday, and found that our car would not let one shift into reverse.  As in, the lever would not slide over and up into reverse.  Everything else was fine - as it has been for years since Dennis went through it.  So, pull into a slot, and try a few more times.  No luck. I have Kelly try it, while I grip the knuckle right before the transaxle inlet shaft.  I twist while she engages, goes right in.  No problem.  Works fine as we leave and head for another C&C.  When we get there (20 miles), the shifter now slides up into the reverse slot no problem.  But no engagement.  No reverse gear.  
> 
> It stayed that way till we got home and I experimented with adjustments.  I tried shortening the linkage, lengthening the linkage, and various rotations of the linkage.  Nothing.  No reverse.
> 
> Any ideas what is going on from you transaxle-knowledgeable folks?  
> 
> Stephen Nelson
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.