[DeTomaso] Installing Edelbrock Carb

[Charles Engles]

Dear Tim,

            In that case, then consider Plan C:   have a custom carb built
that is custom tailored to your engine.  

                     https://www.competitioncarburetion.com/

            Bob Oliver is the owner-operator in Reno, Nevada and he has done
carbs for Panteras before.  I recommend him highly.

                           Warmest regards, Chuck Engles



-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Tim Hobley
Sent: Thursday, July 30, 2020 1:25 PM
To: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Installing Edelbrock Carb

I tried to get one of the PPC tuner carbs 1 or 2 months ago and the message
I received from Larry was that they are not available anymore.  Let us know
if that has changed.

Cheers, Tim

----------------------------------------------------------------------

Message: 1
Date: Wed, 29 Jul 2020 10:24:48 -0700
From: "Chuck and Linda Huber" <lindahuber at cox.net>
To: <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Installing Edelbrock Carb
Message-ID: <09dc01d665cd$2e447df0$8acd79d0$@cox.net>
Content-Type: text/plain;       charset="UTF-8"

Why not try one of the "tuner" carbs advertised in POCA Profiles by PPC in
Carson City?

        - it boasts performance increases, good fuel economy ("if you can
keep your foot out of it"), and would come with customer support.

It's been set up for the Pantera / 351C, and I would assume that the linkage
is standard, with no mods required to make it work.

You could write a review of its performance and your experience.

Chuck



-----Original Message-----
From: Daniel C Jones [mailto:daniel.c.jones2 at gmail.com]
Sent: Tuesday, July 28, 2020 7:27 PM
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Installing Edelbrock Carb

> The Edelbrock carb is a redesigned Carter 4bbl which as I remember was 
> an
amalgam of Rochester and the very early Holley

The Edelbrock AFB and AVS carbs are indeed Carter designs but the AFB is a
descendent of Carter's earlier WCFB.  Carter introduced the first US
production 4 barrel carb in 1952 on the Buick straight 8.  It was known as
the WCFB for Wil Carter Four Barrel.  Made of iron and zinc with an aluminum
top cover, it weighed in at a hefty 18 pounds.  The Carter AFB (Aluminum
Four Barrel) was introduced in 1957 and shared the WCFB's 2 piece design,
stepped rod in jet arrangement for primary metering and enrichment and air
valve secondaries but is much lighter due to its aluminum construction.  The
Edelbrock AFB is based upon the second generation Carter AFB.  Rochester's
first 4 barrel, the 4-Jet (4G or 4GC) was also introduced in 1952.  It does
have a passing similarity to the AFB but is a fixed jet design with spring
loaded secondary air door (similar to the AVS, the AFB used a
counter-weight).  Holley followed a year later with the 2140 "Teapot" 4
barrel which looks nothing like an AFB or later Holley 4150 modular design.

Dan Jones

On Tue, Jul 28, 2020 at 2:40 PM Jack DeRyke via DeTomaso <
detomaso at server.detomasolist.com> wrote:

>    Thinking back 40 years, Fred, the Edelbrock carb is a redesigned Carter
>    4bbl which as I remember was an amalgam of Rochester and the very early
>    Holley that was not at all the same design as what we (mostly) love
>    today. I have no experience with Carter/Edelbrocks beyond using one (of
>    a pair) from a Chrysler 300 on my flathead Ford in high school. I know
>    a few people use them on Panteras but in what state of tune, I don't
>    know. Suggest buying a tuner book before you make the investment in the
>    carb. Or call Edelbrock's tech line. They may try to convince you to go
>    throttle body EFI.... Good luck.
>    J DeRyke
>    -----Original Message-----
>    From: Fred Foreman <fred4man at att.net>
>    To: Detomas List <detomaso at server.detomasolist.com>
>    Sent: Tue, Jul 28, 2020 11:58 am
>    Subject: [DeTomaso] Installing Edelbrock Carb
>    I'm thinking of installing an Edelbrock Performer carb on the Pantera.
>    I'm tired of Holly.  The currently installed Holly has the throttle
>    cable attaching about 1-3/8" down below the throttle shaft.  From the
>    Edelbrock  photos it appears their carb does not have much of a
>    throttle linkage plate below the throttle shaft centerline on which to
>    attach the forward running throttle cable.
>    I'm sure I'm not the first to do this installation.  Any one have a
>    comment or recommendation on throttle cable hook-up?
>    Thanks,
>    Fred Foreman
>    _______________________________________________
>    Detomaso Email List is not managed by POCA
>    Posted emails must not exceed 1.5 Megabytes
>    DeTomaso mailing list
>    [1]DeTomaso at server.detomasolist.com
>    [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>    To manage your subscription (change email address, unsubscribe, etc.)
>    use the links above.
>    Members who post to this list grant license to the list to forward any
>    message posted here to all past, current, or future members of the
>    list. They also grant the list owner permission to maintain an archive
>    or approve the archiving of list messages.
>
> References
>
>    1. mailto:DeTomaso at server.detomasolist.com
>    2. http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not 
> exceed 1.5 Megabytes DeTomaso mailing list 
> DeTomaso at server.detomasolist.com 
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) 
> use the links above.
>
> Members who post to this list grant license to the list to forward any 
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or 
> approve the archiving of list messages.