[DeTomaso] Installing Edelbrock Carb

[Dave Londry]

Oh that's an Air-Gap manifold, so the carb is significantly higher than 
a Performer manifold.
Dave

On 2020-07-28 6:12 p.m., Dave Londry wrote:
>     Here's a sample Fred. It's an Edelbrock Thunder #1813, 800 cfm.
>     I inherited this setup, so I don't have all the part numbers.
>     It's generic though, a 650 Performer swaps in perfectly.
>
>     The 2nd pic is just the spring anchor - taken blind, so bad focus.
>     Dave
>
>     On 2020-07-28 11:58 a.m., Fred Foreman wrote:
>
> I'm thinking of installing an Edelbrock Performer carb on the Pantera.  I'm tire
> d of Holly.  The currently installed Holly has the throttle cable attaching abou
> t 1-3/8" down below the throttle shaft.  From the Edelbrock  photos it appears t
> heir carb does not have much of a throttle linkage plate below the throttle shaf
> t centerline on which to attach the forward running throttle cable.
> I'm sure I'm not the first to do this installation.  Any one have a comment or r
> ecommendation on throttle cable hook-up?
> Thanks,
> Fred Foreman
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the li
> nks above.
>
> Members who post to this list grant license to the list to forward any message p
> osted here to all past, current, or future members of the list. They also grant
> the list owner permission to maintain an archive or approve the archiving of lis
> t messages.
>
> --
> Dave Londry
> TRGuys.com
>
> [3]davel at trguys.com
> Cell     604-721-2278
> Skype    embeddedspaces
>
> References
>
>     1. mailto:DeTomaso at server.detomasolist.com
>     2. http://server.detomasolist.com/mailman/listinfo/detomaso
>     3. mailto:davel at trguys.com
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-- 
Dave Londry
TRGuys.com

davel at trguys.com
Cell     604-721-2278
Skype    embeddedspaces

-------------- next part --------------
   Oh that's an Air-Gap manifold, so the carb is significantly higher than
   a Performer manifold.
   Dave

   On 2020-07-28 6:12 p.m., Dave Londry wrote:

   Here's a sample Fred. It's an Edelbrock Thunder #1813, 800 cfm.
   I inherited this setup, so I don't have all the part numbers.
   It's generic though, a 650 Performer swaps in perfectly.

   The 2nd pic is just the spring anchor - taken blind, so bad focus.
   Dave

   On 2020-07-28 11:58 a.m., Fred Foreman wrote:

I'm thinking of installing an Edelbrock Performer carb on the Pantera.  I'm tire
d of Holly.  The currently installed Holly has the throttle cable attaching abou
t 1-3/8" down below the throttle shaft.  From the Edelbrock  photos it appears t
heir carb does not have much of a throttle linkage plate below the throttle shaf
t centerline on which to attach the forward running throttle cable.
I'm sure I'm not the first to do this installation.  Any one have a comment or r
ecommendation on throttle cable hook-up?
Thanks,
Fred Foreman

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[1]1]DeTomaso at server.detomasolist.com
[2][2]http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.

Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.

--
Dave Londry
TRGuys.com

[[3]3]davel at trguys.com
Cell     604-721-2278
Skype    embeddedspaces

References

   1. [4]mailto:DeTomaso at server.detomasolist.com
   2. [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   3. [6]mailto:davel at trguys.com


_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[8]http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.

Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.

--
Dave Londry
TRGuys.com

[9]davel at trguys.com
Cell     604-721-2278
Skype    embeddedspaces

References

   1. mailto:1]DeTomaso at server.detomasolist.com
   2. http://server.detomasolist.com/mailman/listinfo/detomaso
   3. mailto:3]davel at trguys.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso
   6. mailto:davel at trguys.com
   7. mailto:DeTomaso at server.detomasolist.com
   8. http://server.detomasolist.com/mailman/listinfo/detomaso
   9. mailto:davel at trguys.com