[DeTomaso] Installing Edelbrock Carb

[Mike Drew]

Fred,

‘Tired of Holley’ why exactly?

If you have a poorly set up Holley, you have an owner problem, not a Holley problem. 

Substituting a poorly set up Edelbrock for your poorly set up Holley leaves you with the same problem. :) :) :)

Mike

Sent from my iPad

> On Jul 28, 2020, at 11:58, Fred Foreman <fred4man at att.net> wrote:
> 
> I'm thinking of installing an Edelbrock Performer carb on the Pantera.  I'm tired of Holly.  The currently installed Holly has the throttle cable attaching about 1-3/8" down below the throttle shaft.  From the Edelbrock  photos it appears their carb does not have much of a throttle linkage plate below the throttle shaft centerline on which to attach the forward running throttle cable.
> I'm sure I'm not the first to do this installation.  Any one have a comment or recommendation on throttle cable hook-up?
> Thanks,
> Fred Foreman
> <Dscn0140Lever Arm.jpg>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.