[DeTomaso] Rear wheel offset
Julian Kift
julian_kift at hotmail.com
Tue Jul 21 16:20:12 EDT 2020
Ken,
A 383 Cleveland is a reasonably common iteration using a 3.75" stroker crank and 0.030 overbore.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Tuesday, July 21, 2020 9:46 AM
To: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>; Jerry Knotts <knottsj at galstar.com>
Subject: Re: [DeTomaso] Rear wheel offset
I assume a Cleveland bored to 383 is impossible? I didn't see if the claimed HP was flywheel or chassis?
I hope the owner enjoyed all the $s spent on mods because it may be hard to find at least 2 bidders who love them and will bid up the price. I can't imagine how much $s were spent on the mods.
Ken
On Tuesday, July 21, 2020, 9:25:33 AM PDT, Jerry Knotts <knottsj at galstar.com> wrote:
BAT
https://bringatrailer.com/listing/1971-detomaso-pantera-17/
Sure wish I knew the offset of these rear wheels.
Very personalized car. Some I like some not so much.
Overall pretty nice.
YMMV,
jerry knotts
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Ken,
A 383 Cleveland is a reasonably common iteration using a 3.75" stroker
crank and 0.030 overbore.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Tuesday, July 21, 2020 9:46 AM
To: detomaso at server.detomasolist.com
<detomaso at server.detomasolist.com>; Jerry Knotts <knottsj at galstar.com>
Subject: Re: [DeTomaso] Rear wheel offset
I assume a Cleveland bored to 383 is impossible? I didn't see if the
claimed HP was flywheel or chassis?
I hope the owner enjoyed all the $s spent on mods because it may be
hard to find at least 2 bidders who love them and will bid up the
price. I can't imagine how much $s were spent on the mods.
Ken
On Tuesday, July 21, 2020, 9:25:33 AM PDT, Jerry Knotts
<knottsj at galstar.com> wrote:
BAT
[1]https://bringatrailer.com/listing/1971-detomaso-pantera-17/
Sure wish I knew the offset of these rear wheels.
Very personalized car. Some I like some not so much.
Overall pretty nice.
YMMV,
jerry knotts
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://bringatrailer.com/listing/1971-detomaso-pantera-17/
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list