[DeTomaso] Transaxle - Lost reverse gear

John Taphorn johnftaphorn at gmail.com
Thu Jul 16 08:30:01 EDT 2020


I also have never seen or heard of this failure.  It is curious to me that
the replacement shaft, I presume Dennis used based on the pic, is longer
than the original.  It has been a while since I've opened up a ZF, However,
I am surprised the longer shaft would fit.

JT

On Wed, Jul 15, 2020 at 11:52 PM L GRAY <tipo874a at msn.com> wrote:

>    Yep........ that pin falling out will definitely not allow the reverse
> push arm to engage the gear into mesh.  I’ve done tons of ZF transaxles and
> I have NEVER seen this failure !!! 😱😱😱
>
> Leslie A. Gray
>
> > On Jul 15, 2020, at 8:34 PM, "steve at snclocks.com" <steve at snclocks.com>
> wrote:
> >
> >    Turns out the 6 mm pin that engages the reverse fork went walk about.
> >   Dennis sent me 5 photos - check them out in my Pantera gallery:
> >   [1]
> https://www.snclocks.com/TheRestofourWorld/Autos/1973-Pantera-Detoma
> >   so-5332/i-QCRq22Z  At least it was not my being unable to adjust the
> >   linkage.  Whew.
> >
> >
> >   Question - previously Dennis installed at 0.62 5^th gear.  From day
> >   one, and right through 15K miles, it whined.  The other 4 gears are
> >   quiet.  Do any of you have an RBT 0.62 -  can you comment on how  quiet
> >   yours is?
> >
> >
> >   Stephen Nelson
> >
> >   360-210-7295
> >
> >   Please note - I do not send or receive texts, but I do try to hear the
> >   phone when it rings, unless I am under a car or working in the wood
> >   shop.  Or at the gym.  e-mail is the best way to make sure I will find
> >   your message!
> >
> > References
> >
> >   1.
> https://www.snclocks.com/TheRestofourWorld/Autos/1973-Pantera-Detomaso-5332/i-QCRq22Z
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
   I also have never seen or heard of this failure.A  It is curious to me
   that the replacement shaft, I presume Dennis used based on the pic, is
   longer than the original.A  It has been a while since I've opened up a
   ZF, However, I am surprised the longer shaft would fit.
   JT

   On Wed, Jul 15, 2020 at 11:52 PM L GRAY <[1]tipo874a at msn.com> wrote:

     A  A Yep........ that pin falling out will definitely not allow the
     reverse push arm to engage the gear into mesh.A  Iave done tons of
     ZF transaxles and I have NEVER seen this failure !!! d-+-d-+-d-+-
     Leslie A. Gray
     > On Jul 15, 2020, at 8:34 PM, "[2]steve at snclocks.com"
     <[3]steve at snclocks.com> wrote:
     >
     > i>>?A  A Turns out the 6 mm pin that engages the reverse fork went
     walk about.
     >A  A Dennis sent me 5 photos - check them out in my Pantera
     gallery:
     >A
     A [1][4]https://www.snclocks.com/TheRestofourWorld/Autos/1973-Panter
     a-Detoma
     >A  A so-5332/i-QCRq22ZA  At least it was not my being unable to
     adjust the
     >A  A linkage.A  Whew.
     >
     >
     >A  A Question - previously Dennis installed at 0.62 5^th gear.A
     From day
     >A  A one, and right through 15K miles, it whined.A  The other 4
     gears are
     >A  A quiet.A  Do any of you have an RBT 0.62 -A  can you comment on
     howA  quiet
     >A  A yours is?
     >
     >
     >A  A Stephen Nelson
     >
     >A  A 360-210-7295
     >
     >A  A Please note - I do not send or receive texts, but I do try to
     hear the
     >A  A phone when it rings, unless I am under a car or working in the
     wood
     >A  A shop.A  Or at the gym.A  e-mail is the best way to make sure I
     will find
     >A  A your message!
     >
     > References
     >
     >A  A 1.
     [5]https://www.snclocks.com/TheRestofourWorld/Autos/1973-Pantera-Det
     omaso-5332/i-QCRq22Z
     > _______________________________________________
     >
     >
     > Detomaso Email List is not managed by POCA
     > Posted emails must not exceed 1.5 Megabytes
     > DeTomaso mailing list
     > [6]DeTomaso at server.detomasolist.com
     > [7]http://server.detomasolist.com/mailman/listinfo/detomaso
     >
     > To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     >
     > Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [8]DeTomaso at server.detomasolist.com
     [9]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:tipo874a at msn.com
   2. mailto:steve at snclocks.com
   3. mailto:steve at snclocks.com
   4. https://www.snclocks.com/TheRestofourWorld/Autos/1973-Pantera-Detoma
   5. https://www.snclocks.com/TheRestofourWorld/Autos/1973-Pantera-Detomaso-5332/i-QCRq22Z
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso
   8. mailto:DeTomaso at server.detomasolist.com
   9. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list