[DeTomaso] Best jacking points for floor jack?
Joseph F Byrd, Jr
byrdjf at embarqmail.com
Wed Aug 19 00:16:27 EDT 2020
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Mike Drew via DeTomaso
Sent: Tuesday, August 18, 2020 11:29 PM
To: Julian Kift <julian_kift at hotmail.com>
Cc: DeTomaso Mail List <detomaso at server.detomasolist.com>; Ken Green <kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Best jacking points for floor jack?
Julian,
Yes, that’s right. When in doubt, read the manual. :)
I also jack from the rear crossmember, protecting the sheetmetal lip by putting a 2x4 on top of the jack pad which indexes on the frame rail.
Mike
Sent from my iPad
> On Aug 18, 2020, at 19:24, Julian Kift < <mailto:julian_kift at hotmail.com> julian_kift at hotmail.com> wrote:
>
> I thought the holes in the chassis rails (just behind the front wheel
> fender well and at the rear just in front of where the chassis rails
> angle toward the engine mounts) were there as a keyway for the stock
> scissor jack to sit in?
>
> Julian
> __________________________________________________________________
>
> From: DeTomaso < <mailto:detomaso-bounces at server.detomasolist.com> detomaso-bounces at server.detomasolist.com> on behalf of
> Ken Green via DeTomaso < <mailto:detomaso at server.detomasolist.com> detomaso at server.detomasolist.com>
> Sent: Tuesday, August 18, 2020 6:21 PM
> To: DeTomaso Mail List < <mailto:detomaso at server.detomasolist.com> detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Best jacking points for floor jack?
>
> Anyone have a chart?
> Thanks
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
> exceed 1.5 Megabytes DeTomaso mailing list
> <mailto:DeTomaso at server.detomasolist.com> DeTomaso at server.detomasolist.com
> <http://server.detomasolist.com/mailman/listinfo/detomaso> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list <mailto:DeTomaso at server.detomasolist.com> DeTomaso at server.detomasolist.com <http://server.detomasolist.com/mailman/listinfo/detomaso> http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
image29688
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of
Mike Drew via DeTomaso
Sent: Tuesday, August 18, 2020 11:29 PM
To: Julian Kift <julian_kift at hotmail.com>
Cc: DeTomaso Mail List <detomaso at server.detomasolist.com>; Ken Green
<kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Best jacking points for floor jack?
Julian,
Yes, that's right. When in doubt, read the manual. :)
I also jack from the rear crossmember, protecting the sheetmetal lip by
putting a 2x4 on top of the jack pad which indexes on the frame rail.
Mike
Sent from my iPad
> On Aug 18, 2020, at 19:24, Julian Kift <[1]julian_kift at hotmail.com>
wrote:
>
> I thought the holes in the chassis rails (just behind the front
wheel
> fender well and at the rear just in front of where the chassis
rails
> angle toward the engine mounts) were there as a keyway for the
stock
> scissor jack to sit in?
>
> Julian
>
__________________________________________________________________
>
> From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on
behalf of
> Ken Green via DeTomaso <[3]detomaso at server.detomasolist.com>
> Sent: Tuesday, August 18, 2020 6:21 PM
> To: DeTomaso Mail List <[4]detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Best jacking points for floor jack?
>
> Anyone have a chart?
> Thanks
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
> exceed 1.5 Megabytes DeTomaso mailing list
> [5]DeTomaso at server.detomasolist.com
> [6]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:julian_kift at hotmail.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:detomaso at server.detomasolist.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:DeTomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
7. mailto:DeTomaso at server.detomasolist.com
8. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 141499 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20200819/aa90d2aa/attachment.jpg>
More information about the DeTomaso
mailing list