[DeTomaso] Engine cover
Jeff Detrich
jjdetrich at gmail.com
Mon Apr 27 12:04:22 EDT 2020
It's almost too bad they didn't use dzus fasteners. The square nuts are
hard to get started with screws and are easy to loose.
Jeff
6559
On Sun, Apr 26, 2020 at 3:28 PM Mike Drew via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Dennis,
>
> Mine seemed to be nothing more than typical metric square nuts?
>
> Mike
>
> Sent from my iPad
>
> > On Apr 26, 2020, at 12:54, Dennis Sanford via DeTomaso <
> detomaso at server.detomasolist.com> wrote:
> >
> > Does anyone know what type of nuts are used for the center engine
> cover
> > between the seats. These are captive floating nuts. Two of mine were
> > lost when my engine was pulled out and I would like to replace them.
> > They are not a standard metric square nut, as it would be too small for
> > the cage that is used to hold the nuts in place.
> >
> > Thanks,
> > Dennis Sanford
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
It's almost too bad they didn't use dzus fasteners. The square nuts are
hard to get started with screws and are easy to loose.
Jeff
6559
On Sun, Apr 26, 2020 at 3:28 PM Mike Drew via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
Dennis,
Mine seemed to be nothing more than typical metric square nuts?
Mike
Sent from my iPad
> On Apr 26, 2020, at 12:54, Dennis Sanford via DeTomaso
<[2]detomaso at server.detomasolist.com> wrote:
>
> i>>?A A Does anyone know what type of nuts are used for the
center engine cover
>A A between the seats.A These are captive floating nuts.A Two of
mine were
>A A lost when my engine was pulled out and I would like to replace
them.
>A A They are not a standard metric square nut, as it would be too
small for
>A A the cage that is used to hold the nuts in place.
>
>A A Thanks,
>A A Dennis Sanford
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [3]DeTomaso at server.detomasolist.com
> [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[5]DeTomaso at server.detomasolist.com
[6]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:detomaso at server.detomasolist.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
5. mailto:DeTomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list