[DeTomaso] 6328 Resto Files #2 - Dust to Dust - Way too much Dust

[Mike Thomas]

I'll ask my body guy what he recommends but he'll have the car in his shop in a month or so, surface rust likely won't have a chance to get started.

Mike

-----Original Message-----
From: John Maffeo <johnmaffeo1 at yahoo.com> 
Sent: Saturday, April 18, 2020 4:33 PM
To: Mike Thomas <mbefthomas2 at gmail.com>
Subject: Re: [DeTomaso] 6328 Resto Files #2 - Dust to Dust - Way too much Dust

Nice work! Are you going to seal the bare metal?

John

Sent from my iPhone

> On Apr 18, 2020, at 4:18 PM, Mike Thomas <mbefthomas2 at gmail.com> wrote:
> 
>    Just a couple of pics of me in my home-bound recreational area.
>   Sanding is coming along nicely.  Only filler/bondo I've found I sent
>   pictures of previously (left rear corner).  I'm almost done with all
>   exterior surfaces above the beltline, including the engine bay and
>   frunk (as the exotic car guys are calling the front trunk now . . . ).
>   I'll put the car up on the QuickJack to get a better angle on the ends
>   and sides below the beltline.  If I'm going to find some telltales of
>   rust, that is likely where it will be.  All clean metal above the BL.
>   My builder and I are very happy.
> 
> 
>   Mike Thomas
> 
>   Panteras Northwest
> 
>   Yellow-turning-burnished-steel 6328
> <IMG_1131.jpg>
> <IMG_1130.jpg>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA Posted emails must not 
> exceed 1.5 Megabytes DeTomaso mailing list 
> DeTomaso at server.detomasolist.com 
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.