[DeTomaso] How to TIG/braze brass??

[Roland Jaeckel]

I would solder it with silver solder and then rechrome it. I have done it several times. No big deal.
Roland Jaeckel

> Am 13.04.2020 um 04:05 schrieb Larry Finch via DeTomaso <detomaso at server.detomasolist.com>:
> 
> 
> All,
> 
> Actually, there is some Pantera content as this relates to the console redesign I have given to 2511.
> 
> <image1.jpeg>
> 
> 
> I want to create a chromed gauge panel trim for all four sides of the new horizontal panel. I have collected OEM panel trim for this project to provide the raw material for the new, larger trim piece. 
> 
> The project will require joining pieces to provide the longer lengths needed for the top and right hand portions of the trim. 
> 
> I intend to have the finished piece chrome plated to mimic the OEM trim. I have access to a local chrome shop and they have indicated they are willing and able to take on the project when I get it to them. 
> 
> I am hoping the list wisdom can guide and advise me on my options:
> 
> TIG?  Brazing? Solder?  
> 
> Also, and probably more important, is my need for someone who possesses the skill set to do this for me. :-|
> 
> Thanks,
> 
> Larry
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   I would solder it with silver solder and then rechrome it. I have done
   it several times. No big deal.

   Roland Jaeckel

     Am 13.04.2020 um 04:05 schrieb Larry Finch via DeTomaso
     <detomaso at server.detomasolist.com>:

   All,
   Actually, there is some Pantera content as this relates to the console
   redesign I have given to 2511.
   <image1.jpeg>
   I want to create a chromed gauge panel trim for all four sides of the
   new horizontal panel. I have collected OEM panel trim for this project
   to provide the raw material for the new, larger trim piece.
   The project will require joining pieces to provide the longer lengths
   needed for the top and right hand portions of the trim.
   I intend to have the finished piece chrome plated to mimic the OEM
   trim. I have access to a local chrome shop and they have indicated they
   are willing and able to take on the project when I get it to them.
   I am hoping the list wisdom can guide and advise me on my options:
   TIG?  Brazing? Solder?
   Also, and probably more important, is my need for someone who possesses
   the skill set to do this for me. :-|
   Thanks,
   Larry
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at server.detomasolist.com
   [1]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. http://server.detomasolist.com/mailman/listinfo/detomaso