[DeTomaso] How to TIG/braze brass??
Sean Korb
spkorb at gmail.com
Mon Apr 13 10:22:37 EDT 2020
I was thinking along these lines except 3D print in wax and then cast
in brass, the way the ancients would have done their wax-loss brass
sculptures if they had 3D printers.
On 4/13/20, Tom Shinrock via DeTomaso <detomaso at server.detomasolist.com> wrote:
> I don't know anything about 3D printing but is appears to me you can do
> about anything with it.
> If you can 3D print the trim in plastic and then have it chrome plated
> it might be the easiest solution.
> Tom
> 5186
> -----Original Message-----
> From: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
> To: Email List Address For Posting <detomaso at server.detomasolist.com>
> Sent: Sun, Apr 12, 2020 9:05 pm
> Subject: [DeTomaso] How to TIG/braze brass??
> All,
> Actually, there is some Pantera content as this relates to the console
> redesign I have given to 2511.
> I want to create a chromed gauge panel trim for all four sides of the
> new horizontal panel. I have collected OEM panel trim for this project
> to provide the raw material for the new, larger trim piece.
> The project will require joining pieces to provide the longer lengths
> needed for the top and right hand portions of the trim.
> I intend to have the finished piece chrome plated to mimic the OEM
> trim. I have access to a local chrome shop and they have indicated they
> are willing and able to take on the project when I get it to them.
> I am hoping the list wisdom can guide and advise me on my options:
> TIG? Brazing? Solder?
> Also, and probably more important, is my need for someone who possesses
> the skill set to do this for me. :-|
> Thanks,
> Larry _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. mailto:DeTomaso at server.detomasolist.com
> 2. http://server.detomasolist.com/mailman/listinfo/detomaso
>
--
Sean Korb spkorb at gmail.com http://spkorb.org (est 1994)
"Computers are useless. They can only give you answers." -P. Picasso
More information about the DeTomaso
mailing list