[DeTomaso] Battery Cable Ends, OK to solder?

[Thomas Törnblom]

I think they are designed to be crimped. 

A problem with soldering is that the solder will wick into the cable and make it stiff.

/Thomas

> 20 okt. 2019 kl. 00:11 skrev Ken Green via DeTomaso <detomaso at server.detomasolist.com>:
> 
>    OK, thanks
> 
>   On Saturday, October 19, 2019, 2:48:30 PM PDT, Jack DeRyke via DeTomaso
>   <detomaso at server.detomasolist.com> wrote:
>     They're made to be soldered. The only thing to be careful of is the
>     huge amount of heat necessary, that might burn the cable insulation.
>     You'll need a propane torch and lots of flux. Add shrink tubing slid
>     well out of the way before soldering.
>     -----Original Message-----
>     From: Ken Green via DeTomaso <[1]detomaso at server.detomasolist.com>
>     To: Detomaso Email List <[2]detomaso at detomasolist.com>
>     Sent: Sat, Oct 19, 2019 2:22 pm
>     Subject: [DeTomaso] Battery Cable Ends, OK to solder?
>       I have some fairly heavy and nice looking battery cable ends.  I
>     think
>       they can be crimped, but I'd like to just solder them.  Any reason
>   to
>       not solder onto the cables?
>       Thanks, Inline image
>       Ken
>     _______________________________________________
>     Detomaso Email List is not managed by POCA
>     Posted emails must not exceed 1.5 Megabytes
>     DeTomaso mailing list
>     [1][3]DeTomaso at server.detomasolist.com
>     [2][4]http://server.detomasolist.com/mailman/listinfo/detomaso
>     To manage your subscription (change email address, unsubscribe, etc.)
>     use the links above.
>     Members who post to this list grant license to the list to forward
>   any
>     message posted here to all past, current, or future members of the
>     list. They also grant the list owner permission to maintain an
>   archive
>     or approve the archiving of list messages.
>   References
>     1. mailto:[5]DeTomaso at server.detomasolist.com
>     2. [6]http://server.detomasolist.com/mailman/listinfo/detomaso
>   _______________________________________________
>   Detomaso Email List is not managed by POCA
>   Posted emails must not exceed 1.5 Megabytes
>   DeTomaso mailing list
>   [7]DeTomaso at server.detomasolist.com
>   [8]http://server.detomasolist.com/mailman/listinfo/detomaso
>   To manage your subscription (change email address, unsubscribe, etc.)
>   use the links above.
>   Members who post to this list grant license to the list to forward any
>   message posted here to all past, current, or future members of the
>   list. They also grant the list owner permission to maintain an archive
>   or approve the archiving of list messages.
> 
> References
> 
>   1. mailto:detomaso at server.detomasolist.com
>   2. mailto:detomaso at detomasolist.com
>   3. mailto:DeTomaso at server.detomasolist.com
>   4. http://server.detomasolist.com/mailman/listinfo/detomaso
>   5. mailto:DeTomaso at server.detomasolist.com
>   6. http://server.detomasolist.com/mailman/listinfo/detomaso
>   7. mailto:DeTomaso at server.detomasolist.com
>   8. http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> 
> !DSPAM:5dab8a1b276382702129851!
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> 
> !DSPAM:5dab8a1b276382702129851!