[DeTomaso] Battery Cable Ends, OK to solder?

[jderyke at aol.com]

They're made to be soldered. The only thing to be careful of is the huge amount of heat necessary, that might burn the cable insulation. You'll need a propane torch and lots of flux. Add shrink tubing slid well out of the way before soldering. 
 
 
 
-----Original Message-----
From: Ken Green via DeTomaso <detomaso at server.detomasolist.com>
To: Detomaso Email List <detomaso at detomasolist.com>
Sent: Sat, Oct 19, 2019 2:22 pm
Subject: [DeTomaso] Battery Cable Ends, OK to solder?

  I have some fairly heavy and nice looking battery cable ends.  I think
  they can be crimped, but I'd like to just solder them.  Any reason to
  not solder onto the cables?
  Thanks, Inline image
  Ken
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   They're made to be soldered. The only thing to be careful of is the
   huge amount of heat necessary, that might burn the cable insulation.
   You'll need a propane torch and lots of flux. Add shrink tubing slid
   well out of the way before soldering.
   -----Original Message-----
   From: Ken Green via DeTomaso <detomaso at server.detomasolist.com>
   To: Detomaso Email List <detomaso at detomasolist.com>
   Sent: Sat, Oct 19, 2019 2:22 pm
   Subject: [DeTomaso] Battery Cable Ends, OK to solder?
     I have some fairly heavy and nice looking battery cable ends.  I
   think
     they can be crimped, but I'd like to just solder them.  Any reason to
     not solder onto the cables?
     Thanks, Inline image
     Ken
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [1]DeTomaso at server.detomasolist.com
   [2]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:DeTomaso at server.detomasolist.com
   2. http://server.detomasolist.com/mailman/listinfo/detomaso