[DeTomaso] Rear Suspension Clevis Mount Needed
Mike & Elizabeth Thomas
mbefthomas at comcast.net
Thu May 23 11:34:49 EDT 2019
Thanks all, sourced one with Steve Wilkinson yesterday. It's actually a
forged piece and has not been remade in a quality manner so NOS is the only
source. Strange that I would have one with bungled threads - no idea how
long it's been like that.
Mike Thomas
From: Julian Kift <julian_kift at hotmail.com>
Sent: Wednesday, May 22, 2019 4:03 PM
To: 'DeTomaso Mail List' <detomaso at server.detomasolist.com>; Mike &
Elizabeth Thomas <mbefthomas at comcast.net>; Ken Green <kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Rear Suspension Clevis Mount Needed
Mike,
Not a costly item, I would contact you favorite vendor and get one shipped.
Alternatively a good shop should be able to fabricate or weld new threaded
section onto your existing one.
Julian
_____
From: DeTomaso <detomaso-bounces at server.detomasolist.com
<mailto:detomaso-bounces at server.detomasolist.com> > on behalf of Ken Green
via DeTomaso <detomaso at server.detomasolist.com
<mailto:detomaso at server.detomasolist.com> >
Sent: Wednesday, May 22, 2019 3:45 PM
To: 'DeTomaso Mail List'; Mike & Elizabeth Thomas
Subject: Re: [DeTomaso] Rear Suspension Clevis Mount Needed
There was one on ebay, I think Mike Mayberry. but I don't see it now. You
might email Mike:
mikedmayberry at hotmail.com <mailto:mikedmayberry at hotmail.com>
Ken
On Wednesday, May 22, 2019, 3:36:49 PM PDT, Mike & Elizabeth Thomas
<mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> > wrote:
I had the car aligned today and the tech found that the threads on the
driver's side forward lower rear suspension clevis bracket that the
A-arm is bolted to and goes through the frame was partially stripped.
Does anyone out there have one they can sell/send me? Prepping for
Reno and thought I was there but one more thing to fix after the
steering rack.
Thanks!
Mike Thomas
Pres., Panteras Northwest
206-795-3302
Yellow '74 #6328
[1]www.panterasnorthwest.com <http://www.panterasnorthwest.com>
Thrashing in Covington
References
1. http://www.panterasnorthwest.com/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
-------------- next part --------------
Thanks all, sourced one with Steve Wilkinson yesterday. It's actually
a forged piece and has not been remade in a quality manner so NOS is
the only source. Strange that I would have one with bungled threads -
no idea how long it's been like that.
Mike Thomas
From: Julian Kift <julian_kift at hotmail.com>
Sent: Wednesday, May 22, 2019 4:03 PM
To: 'DeTomaso Mail List' <detomaso at server.detomasolist.com>; Mike &
Elizabeth Thomas <mbefthomas at comcast.net>; Ken Green
<kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Rear Suspension Clevis Mount Needed
Mike,
Not a costly item, I would contact you favorite vendor and get one
shipped. Alternatively a good shop should be able to fabricate or weld
new threaded section onto your existing one.
Julian
_____________________________________________________________________
From: DeTomaso <[1]detomaso-bounces at server.detomasolist.com> on behalf
of Ken Green via DeTomaso <[2]detomaso at server.detomasolist.com>
Sent: Wednesday, May 22, 2019 3:45 PM
To: 'DeTomaso Mail List'; Mike & Elizabeth Thomas
Subject: Re: [DeTomaso] Rear Suspension Clevis Mount Needed
There was one on ebay, I think Mike Mayberry. but I don't see it now.
You might email Mike:
[3]mikedmayberry at hotmail.com
Ken
On Wednesday, May 22, 2019, 3:36:49 PM PDT, Mike & Elizabeth Thomas
<[4]mbefthomas at comcast.net> wrote:
I had the car aligned today and the tech found that the threads on
the
driver's side forward lower rear suspension clevis bracket that the
A-arm is bolted to and goes through the frame was partially stripped.
Does anyone out there have one they can sell/send me? Prepping for
Reno and thought I was there but one more thing to fix after the
steering rack.
Thanks!
Mike Thomas
Pres., Panteras Northwest
206-795-3302
Yellow '74 #6328
[1][5]www.panterasnorthwest.com
Thrashing in Covington
References
1. [6]http://www.panterasnorthwest.com/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:detomaso-bounces at server.detomasolist.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:mikedmayberry at hotmail.com
4. mailto:mbefthomas at comcast.net
5. http://www.panterasnorthwest.com/
6. http://www.panterasnorthwest.com/
7. mailto:DeTomaso at server.detomasolist.com
8. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list