[DeTomaso] Speed Bleeders - PSA

Mike Drew MikeLDrew at aol.com
Mon May 6 15:14:27 EDT 2019


Dennis,

I think these numbers are already in Bill Taylor’s Gearhead Database, but if not I will add them. 

(Bill turned over the maintenance of his database to me a few months ago, but I haven’t had anything to add since then).

Mike

Sent from my iPad

> On May 6, 2019, at 11:49, Dennis Valdez via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
>   Hi All,
>   This weekend I flushed by brake and clutch lines and installed speed
>   bleeders at the same time.  For those not familiar, speed bleeders have
>   an internal check valve, that when the bleeder is loosened, allows the
>   fluid to flow out but does not permit air or fluid to re-enter.  This
>   makes bleeding a one person job.
>   [1]http://www.speedbleeder.com/
>   The part numbers I used are as follows for sock calipers and clutch
>   slave:
>   Brakes:
>   SB8125L M8x1.25  You will need six of these
>   Clutch Slave:
>   SB6100 M6x1.0  You will need one of these
>   They come with rubber dirt caps as well.  My stock caps had long been
>   lost.
>   Cheers!
>   Dennis Valdez
> 
> References
> 
>   1. http://www.speedbleeder.com/
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.



More information about the DeTomaso mailing list