[DeTomaso] Speed Bleeders - PSA

[Brent Stewart]

 Brilliant!  Thanks for the tip!!
    On Monday, May 6, 2019, 11:50:05 AM PDT, Dennis Valdez via DeTomaso <detomaso at server.detomasolist.com> wrote:  
 
   Hi All,
  This weekend I flushed by brake and clutch lines and installed speed
  bleeders at the same time.  For those not familiar, speed bleeders have
  an internal check valve, that when the bleeder is loosened, allows the
  fluid to flow out but does not permit air or fluid to re-enter.  This
  makes bleeding a one person job.
  [1]http://www.speedbleeder.com/
  The part numbers I used are as follows for sock calipers and clutch
  slave:
  Brakes:
  SB8125L M8x1.25  You will need six of these
  Clutch Slave:
  SB6100 M6x1.0  You will need one of these
  They come with rubber dirt caps as well.  My stock caps had long been
  lost.
  Cheers!
  Dennis Valdez

References

  1. http://www.speedbleeder.com/
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   Brilliant!  Thanks for the tip!!

   On Monday, May 6, 2019, 11:50:05 AM PDT, Dennis Valdez via DeTomaso
   <detomaso at server.detomasolist.com> wrote:
     Hi All,
     This weekend I flushed by brake and clutch lines and installed speed
     bleeders at the same time.  For those not familiar, speed bleeders
   have
     an internal check valve, that when the bleeder is loosened, allows
   the
     fluid to flow out but does not permit air or fluid to re-enter.  This
     makes bleeding a one person job.
     [1][1]http://www.speedbleeder.com/
     The part numbers I used are as follows for sock calipers and clutch
     slave:
     Brakes:
     SB8125L M8x1.25  You will need six of these
     Clutch Slave:
     SB6100 M6x1.0  You will need one of these
     They come with rubber dirt caps as well.  My stock caps had long been
     lost.
     Cheers!
     Dennis Valdez
   References
     1. [2]http://www.speedbleeder.com/
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [3]DeTomaso at server.detomasolist.com
   [4]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. http://www.speedbleeder.com/
   2. http://www.speedbleeder.com/
   3. mailto:DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso