[DeTomaso] Head ID

Sean Korb spkorb at gmail.com
Tue Mar 5 12:26:29 EST 2019


These are good for extraordinary power.  Robert Stroj mentioned them
on his Pantera some years ago.  Dan Jones also has extensive
information on these heads and the differences from the A3 and B3
heads.  They are all meant for customization so each head is likely
very different in pairs.  Do you have a build sheet for your motor?
These are very impressive numbers, potentially.

       From: Robert Stroj [npdrs at maui.net]
   Sent: 4/12/2014 3:16:51 AM
   To: detomaso at poca.com
   Subject: [DeTomaso] New engine
   I just got my new motor completed, it is Fontana aluminum block based
   motor
   using Yates C3 heads.
   It made 676Hp at 6500rpm and 585lb-ft torque at 5250rpm; this is
   corrected
   data to sea level, actual figures as tested in Colorado at 8500ft
   altitude
   ware 429Hp and 384lb-ft.
   This are figures using dyno carb and open exhaust.

On 3/5/19, David <david at msmcontractors.org> wrote:
> Good Morning All:
> Was wondering if anyone knows what these heads are on my Pantera?
> Stamped on the end of the head is : G2245S
> Thanks,
> David Finley #3659
>
>
>


-- 
Sean Korb spkorb at spkorb.org http://www.spkorb.org
'65 Suprang,'68 Cougar,'78 R100/7,'60 Metro,'59 A35,'71 Pantera #1382
"The more you drive, the less intelligent you get" --Miller
"Computers are useless.  They can only give you answers." -P. Picasso


More information about the DeTomaso mailing list