[DeTomaso] Steering How to raise tab

[bill gaino]

The lock tabs are hard to come by, I had to buy a used one from a vendor.  Bill 1362


https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts  
If you want it slick.  www.slickpaint.com  like us on facebook


-----Original Message-----
>From: Julian Kift <julian_kift at hotmail.com>
>Sent: Jul 14, 2019 11:04 AM
>To: Steven Edwards1969Dart <gsedwards at cox.net>, "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
>Subject: Re: [DeTomaso] Steering How to raise tab
>
>   A small sacrificial screwdriver with a sharp point or chisel to pry it
>   up usually works.
>     __________________________________________________________________
>
>   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
>   Steven Edwards1969Dart <gsedwards at cox.net>
>   Sent: Sunday, July 14, 2019 7:40 AM
>   To: detomaso at server.detomasolist.com
>   Subject: [DeTomaso] Steering How to raise tab
>
>   I am at a lost as to how to get this dented raised so I can unscrew to
>   get the rack out. I can not get anything to grab the dent without
>   destroying the locking collar. I was looking at using a Dremel to cut
>   it some so I can get a tool in there to bend it up.
>   Is this collar available to replace?
>   Steven Edwards