[DeTomaso] Tach signal MSD vs Mallory
B Hower
b.hower3400 at yahoo.com
Wed Jul 3 20:22:19 EDT 2019
I run a Unilite distributor and use no adapter.
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )
On Wednesday, July 3, 2019, 4:17:35 PM CDT, B. SEIB <oldwheel at shaw.ca> wrote:
The issue of a requirement for an adapter is dependant on whether the
box(or coil) supplies the signal or not. It really isn't related to the
distributor type. I use a Duraspark magnetic trigger distributor with the
Duraspark module and coil. No tach adapter is required because the Duraspark
module tach output terminal is designed to give the same output as a normal
ignition coil and points. The MSD doesn't do this, so the 8920 adapter is
required. Perhaps the Unilite box does have a tach terminal that provides
the same output as a normal ignition coil and ponts ?
Barry
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I run a Unilite distributor and use no adapter.
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
! )
On Wednesday, July 3, 2019, 4:17:35 PM CDT, B. SEIB <oldwheel at shaw.ca>
wrote:
The issue of a requirement for an adapter is dependant on whether the
box(or coil) supplies the signal or not. It really isn't related to the
distributor type. I use a Duraspark magnetic trigger distributor with
the
Duraspark module and coil. No tach adapter is required because the
Duraspark
module tach output terminal is designed to give the same output as a
normal
ignition coil and points. The MSD doesn't do this, so the 8920 adapter
is
required. Perhaps the Unilite box does have a tach terminal that
provides
the same output as a normal ignition coil and ponts ?
Barry
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list