[DeTomaso] QuickJack Portable Car Lift - $999 at Costco
Dick Koch
redcatman74 at gmail.com
Sun Jan 27 18:05:03 EST 2019
If you look at the review video, you will see there is ample access to the
rear of the car, with the front of the car over the hydraulic cylinders,
leaving the rear open. At a lift height of 51" I have ample room to work
underneath the car.
Yes, you would need to make ramps to initially clear the lift, which I
made. It really is no big deal.
This is a hefty lift at 1,150#, but I can move it around easily, as you can
see in the video.
I put a hydraulic quick disconnect to the pump so I can move it out of the
way when the car is on the lift or not being used.
Dick Koch -Atlanta
On Sun, Jan 27, 2019, 5:41 PM Mike & Elizabeth Thomas <
mbefthomas at comcast.net wrote:
> Thanks Dick. My only question would be what’s the clearance? Not sure it
> would fit under the Pantera without using some 2x10” rails or other to
> drive up on. Also, not sure how much access there would be to the front of
> the engine and coolant pipes etc. What has your experience been so far?
>
>
>
> - Mike
>
>
>
> *From:* Dick Koch <redcatman74 at gmail.com>
> *Sent:* Sunday, January 27, 2019 2:28 PM
> *To:* Mike & Elizabeth Thomas <mbefthomas at comcast.net>
> *Cc:* Detomaso Email List <detomaso at detomasolist.com>; detomaso <
> DeTomaso at server.detomasolist.com>
> *Subject:* Re: [DeTomaso] QuickJack Portable Car Lift - $999 at Costco
>
>
>
> Mike, this may be more than you want but I would suggest you consider a
> scissors lift.
>
>
>
> In looking at them, I found what I think is one of the best - the Titan
> 6600. I found it available online for $1,499 + $285 shipping.
>
>
>
> Take a look:
>
> https://youtu.be/cGdiGixzC1w
>
>
>
> I was going to use it in my garage, but a friend said I could use his new
> private shop he is outfitting to work on his corral of cars, so I had it
> delivered there.
>
>
>
>
> https://m.facebook.com/story.php?story_fbid=2652647691441880&id=100000900252005
>
>
>
> This lift at the price I paid for it is far superior to the others I
> considered.
>
>
>
> Dick Koch - Atlanta
>
>
>
> On Sun, Jan 27, 2019, 4:38 PM Mike & Elizabeth Thomas <
> mbefthomas at comcast.net wrote:
>
> Anyone with experience with the QuckJack portable lift?
>
>
> [1]https://www.quickjack.com/
>
>
> Given that the typical Pantera jack points, at least to get the whole
> car off the ground, don't run along the side rails, not sure if it
> would work as well. My jack points are the front corners of the frame
> where the jack hole is, but I use the center of the three motor mount
> bolts as the rear jack stand location. I suppose you could angle this
> one in towards the center of the car to do that, but not sure if that
> would be safe or stable.
>
>
> Thoughts? I don't have room for a full car lift or two post portable.
> Costco has these on sale now for $999 for a set.
>
>
> Thanks
>
> Mike Thomas
>
> Pres., Panteras Northwest
>
> 206-795-3302
>
> Yellow '74 #6328
>
> [2]www.panterasnorthwest.com
>
> References
>
> 1. https://www.quickjack.com/
> 2. http://www.panterasnorthwest.com/
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
-------------- next part --------------
If you look at the review video, you will see there is ample access to
the rear of the car, with the front of the car over the hydraulic
cylinders, leaving the rear open. At a lift height of 51" I have ample
room to work underneath the car.
Yes, you would need to make ramps to initially clear the lift, which I
made. It really is no big deal.
This is a hefty lift at 1,150#, but I can move it around easily, as you
can see in the video.
I put a hydraulic quick disconnect to the pump so I can move it out of
the way when the car is on the lift or not being used.
Dick Koch -Atlanta
On Sun, Jan 27, 2019, 5:41 PM Mike & Elizabeth Thomas
<[1]mbefthomas at comcast.net wrote:
Thanks Dick.A My only question would be whatas the clearance?A Not
sure it would fit under the Pantera without using some 2x10a rails or
other to drive up on.A Also, not sure how much access there would be
to the front of the engine and coolant pipes etc.A What has your
experience been so far?
A
- Mike
A
From: Dick Koch <[2]redcatman74 at gmail.com>
Sent: Sunday, January 27, 2019 2:28 PM
To: Mike & Elizabeth Thomas <[3]mbefthomas at comcast.net>
Cc: Detomaso Email List <[4]detomaso at detomasolist.com>; detomaso
<[5]DeTomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] QuickJack Portable Car Lift - $999 at Costco
A
Mike, this may be more than you want but I would suggest you consider a
scissors lift.
A
In looking at them, I found what I think is one of the best - the Titan
6600. I found it available online forA $1,499A +A $285A shipping.A
A
Take a look:
[6]https://youtu.be/cGdiGixzC1w
A
I was going to use it in my garage, but a friend said I could use his
new private shop he is outfitting to work on his corral of cars, so I
had it delivered there.A
A
[7]https://m.facebook.com/story.php?story_fbid=2652647691441880&id=1000
00900252005
A
This lift at the price I paid for it is far superior to the others I
considered.
A
Dick Koch - Atlanta
A
On Sun, Jan 27, 2019, 4:38 PM Mike & Elizabeth Thomas
<[8]mbefthomas at comcast.net wrote:
A A Anyone with experience with the QuckJack portable lift?
A A [1][9]https://www.quickjack.com/
A A Given that the typical Pantera jack points, at least to get the
whole
A A car off the ground, don't run along the side rails, not sure if
it
A A would work as well.A My jack points are the front corners of
the frame
A A where the jack hole is, but I use the center of the three motor
mount
A A bolts as the rear jack stand location.A I suppose you could
angle this
A A one in towards the center of the car to do that, but not sure
if that
A A would be safe or stable.
A A Thoughts?A I don't have room for a full car lift or two post
portable.
A A Costco has these on sale now for $999 for a set.
A A Thanks
A A Mike Thomas
A A Pres., Panteras Northwest
A A 206-795-3302
A A Yellow '74 #6328
A A [2][10]www.panterasnorthwest.com
References
A A 1. [11]https://www.quickjack.com/
A A 2. [12]http://www.panterasnorthwest.com/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[13]DeTomaso at server.detomasolist.com
[14]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:mbefthomas at comcast.net
2. mailto:redcatman74 at gmail.com
3. mailto:mbefthomas at comcast.net
4. mailto:detomaso at detomasolist.com
5. mailto:DeTomaso at server.detomasolist.com
6. https://youtu.be/cGdiGixzC1w
7. https://m.facebook.com/story.php?story_fbid=2652647691441880&id=100000900252005
8. mailto:mbefthomas at comcast.net
9. https://www.quickjack.com/
10. http://www.panterasnorthwest.com/
11. https://www.quickjack.com/
12. http://www.panterasnorthwest.com/
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list