[DeTomaso] CARB
audionut at hushmail.com
audionut at hushmail.com
Fri Jan 18 15:01:26 EST 2019
...and no choke is necessary.
I have Larry's Quick Fuel Holley with the choke completely removed and
it always starts up just fine, even in winter.
(Air temp was upper 30's last month when I last drove it)
Sent using Hushmail
On 1/18/2019 at 12:20 AM, "Charles McCall" wrote:I agree with Mike -
on a mild engine build, an off-the-shelf carb will work
just fine and you won't see much improvement, if any, from a custom
job. If
you did have a non-standard engine, then I'd suggest going to one of
the
shops that custom builds carbs for your specific engine configuration,
like
Chuck Nuytten. But for a standard configuration you should be happy
with
Mike's suggestion
On Fri, Jan 18, 2019 at 4:17 AM Mike Drew via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Trip,
> Assuming you don't have a Ford cast-iron intake, and instead have
some
> aftermarket square bore intake, a simple Holley 650 Double pumper
> (factory carb on Euro cars) or Holley 650 vacuum secondary would
work
> great.
> Be sure not to get the cheap ones with side pivot floats. You
want the
> 4150 versions with center pivot floats.
> Here is a vacuum secondary 4150.
>
> [1]https://www.summitracing.com/parts/hly-0-80783c
>
> Double pumper with manual (which is to say, no) choke:
>
> [2]https://www.summitracing.com/parts/hly-0-4777c
>
> Double pumper with electric choke:
>
> [3]https://www.summitracing.com/parts/hly-0-4777ce
>
> Any of these will likely make you very happy.
>
> Mike
> Sent from my iPad
>
> On Jan 17, 2019, at 14:28, Trip Owen wrote:
>
> As you may know Larry Stocks custom carbs are on back order -
can
>
> someone suggest another "bolt on" carb for stock
>
> 351C with mild cam, or is it worth waiting?
>
> Trip
>
> Sent from [1]Mail for Windows 10
>
> References
>
> 1. [5]https://go.microsoft.com/fwlink/?LinkId=550986
>
> _______________________________________________
>
> Detomaso Email List is not managed by POCA
>
> Posted emails must not exceed 1.5 Megabytes
>
> DeTomaso mailing list
>
> [6]DeTomaso at server.detomasolist.com
>
> [7]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
>
> Members who post to this list grant license to the list to
forward
> any message posted here to all past, current, or future members
of
> the list. They also grant the list owner permission to maintain
an
> archive or approve the archiving of list messages.
>
> References
>
> 1. https://www.summitracing.com/parts/hly-0-80783c
> 2. https://www.summitracing.com/parts/hly-0-4777c
> 3. https://www.summitracing.com/parts/hly-0-4777ce
> 4. mailto:lance730 at msn.com
> 5. https://go.microsoft.com/fwlink/?LinkId=550986
> 6. mailto:DeTomaso at server.detomasolist.com
> 7. http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive or
approve
> the archiving of list messages.
-------------- next part --------------
...and no choke is necessary.
I have Larry's Quick Fuel Holley with the choke completely removed and
it always starts up just fine, even in winter.
(Air temp was upper 30's last month when I last drove it)
Sent using Hushmail
On 1/18/2019 at 12:20 AM, "Charles McCall" <charlesmccall at gmail.com>
wrote:
I agree with Mike - on a mild engine build, an off-the-shelf carb
will work
just fine and you won't see much improvement, if any, from a custom
job. If
you did have a non-standard engine, then I'd suggest going to one of
the
shops that custom builds carbs for your specific engine
configuration, like
Chuck Nuytten. But for a standard configuration you should be happy
with
Mike's suggestion
On Fri, Jan 18, 2019 at 4:17 AM Mike Drew via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Trip,
> Assuming you don't have a Ford cast-iron intake, and instead have
some
> aftermarket square bore intake, a simple Holley 650 Double pumper
> (factory carb on Euro cars) or Holley 650 vacuum secondary would
work
> great.
> Be sure not to get the cheap ones with side pivot floats. You want
the
> 4150 versions with center pivot floats.
> Here is a vacuum secondary 4150.
>
> [1][1]https://www.summitracing.com/parts/hly-0-80783c
>
> Double pumper with manual (which is to say, no) choke:
>
> [2][2]https://www.summitracing.com/parts/hly-0-4777c
>
> Double pumper with electric choke:
>
> [3][3]https://www.summitracing.com/parts/hly-0-4777ce
>
> Any of these will likely make you very happy.
>
> Mike
> Sent from my iPad
>
> On Jan 17, 2019, at 14:28, Trip Owen <[4]lance730 at msn.com> wrote:
>
> As you may know Larry Stocks custom carbs are on back order - can
>
> someone suggest another "bolt on" carb for stock
>
> 351C with mild cam, or is it worth waiting?
>
> Trip
>
> Sent from [1]Mail for Windows 10
>
> References
>
> 1. [5][4]https://go.microsoft.com/fwlink/?LinkId=550986
>
> _______________________________________________
>
> Detomaso Email List is not managed by POCA
>
> Posted emails must not exceed 1.5 Megabytes
>
> DeTomaso mailing list
>
> [6]DeTomaso at server.detomasolist.com
>
> [7][5]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of
> the list. They also grant the list owner permission to maintain an
> archive or approve the archiving of list messages.
>
> References
>
> 1. [6]https://www.summitracing.com/parts/hly-0-80783c
> 2. [7]https://www.summitracing.com/parts/hly-0-4777c
> 3. [8]https://www.summitracing.com/parts/hly-0-4777ce
> 4. mailto:lance730 at msn.com
> 5. [9]https://go.microsoft.com/fwlink/?LinkId=550986
> 6. mailto:DeTomaso at server.detomasolist.com
> 7. [10]http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [11]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive
or approve
> the archiving of list messages.
References
1. https://www.summitracing.com/parts/hly-0-80783c
2. https://www.summitracing.com/parts/hly-0-4777c
3. https://www.summitracing.com/parts/hly-0-4777ce
4. https://go.microsoft.com/fwlink/?LinkId=550986
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. https://www.summitracing.com/parts/hly-0-80783c
7. https://www.summitracing.com/parts/hly-0-4777c
8. https://www.summitracing.com/parts/hly-0-4777ce
9. https://go.microsoft.com/fwlink/?LinkId=550986
10. http://server.detomasolist.com/mailman/listinfo/detomaso
11. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list