[DeTomaso] Door trim and window felt install tips??

[Dennis Valdez]

Larry, don’t know if this is what you’re asking about, but it may be helpful. 

http://www.panteraplace.com/page147.htm

Dennis

> On Dec 20, 2019, at 4:19 PM, Larry Finch via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
>    All,
> 
>    I have freshly powder coated trim and a freshly painted body and
>   certainly do not want to damage either in the installation process.  I
>   also have new felt  and window channel to install.
> 
>   This would be much easier if I had taken things apart, but that was
>   done by the repair shop so I have no previous experience to fall back
>   on.
> 
>   2511 still has the rivet holes for drip rail and B-piller pieces,  so
>   their installation is self-explanatory.
> 
>   Would greatly appreciate hearing from anyone who has been down this
>   road before.  Please share any pertinent tips regarding sequence of
>   installation, resolving difficulties in re-snapping trim onto body, or
>   anything worthy of sharing.
> 
>   Thanks.
> 
>   Larry
> 
>   Sent from me using a magic, handheld electronic gizmo.
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   Larry, don't know if this is what you're asking about, but it may be
   helpful.

   [1]http://www.panteraplace.com/page147.htm

   Dennis

     On Dec 20, 2019, at 4:19 PM, Larry Finch via DeTomaso
     <detomaso at server.detomasolist.com> wrote:

     All,
      I have freshly powder coated trim and a freshly painted body and
     certainly do not want to damage either in the installation process.
   I
     also have new felt  and window channel to install.
     This would be much easier if I had taken things apart, but that was
     done by the repair shop so I have no previous experience to fall back
     on.
     2511 still has the rivet holes for drip rail and B-piller pieces,  so
     their installation is self-explanatory.
     Would greatly appreciate hearing from anyone who has been down this
     road before.  Please share any pertinent tips regarding sequence of
     installation, resolving difficulties in re-snapping trim onto body,
   or
     anything worthy of sharing.
     Thanks.
     Larry
     Sent from me using a magic, handheld electronic gizmo.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at server.detomasolist.com
   http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. http://www.panteraplace.com/page147.htm