[DeTomaso] New Fuel Injection recommendations
billmoore6480
billmoore6480 at gmail.com
Fri Dec 20 18:37:47 EST 2019
Ken, or you could install a 750 DPCheersBill MooreCalgary4038604300
-------- Original message --------From: Ken Green via DeTomaso <detomaso at server.detomasolist.com> Date: 12/20/19 4:33 PM (GMT-07:00) To: Julian Kift <julian_kift at hotmail.com>, Jeff Detrich <jjdetrich at gmail.com> Cc: detomaso at server.detomasolist.com, Mike 01Ditucci <ditucci at att.net> Subject: Re: [DeTomaso] New Fuel Injection recommendations You can go here and download the free FAST XFI C-COM 2.0 software:https://www.fuelairspark.com/software-downloadsIf you install it, you can go to:HELP: INDEXand get a massive amount of information.You can connect the ECU to the internet and use remote turning services so you don't need to rely on local support to fix issues, and it is suppose to be self learning. There is a Facebook group and the Comp Cams FAST forum:http://www.cpgnation.com/forum/forums/fast-support-forum.235/Still installing, so no personal experience.Some people like the Holley system better so you might want to look into it.Ken On Friday, December 20, 2019, 2:50:35 PM PST, Jeff Detrich <jjdetrich at gmail.com> wrote: Thanks fur responding Julian. My car starts and runs, but not great. My Electromotive TEC3a doesn't have a workable idle control valve circuit which I need with a Holley style throttle body - we've tuned around that problem but still not very good, still uses an old PC serial connection, requires experts to program and modify (which don't exist here in Dallas), and their support was horrible until I just gave up. I needA something that is reliable, supportable and supported here. I'm tired of apologizing for it. I do realize that a new system will not be as flexible and controllable as the TEC3a but I've had it for 13 years and it's the same old same old. I'm generalizing here but guys with the new systems just plug it in and it goes.A I know you've recommended FAST in the past and I will look at them to see if they are self learning. My recollection of it from 10 years ago is that is similar to the TEC3a but I'm not sure if it has been redone into a more modern system? Jeff On Fri, Dec 20, 2019 at 4:15 PM Julian Kift <[1]julian_kift at hotmail.com> wrote: Why? What benefits are you expecting over those the Electromotive ECU can't offer? Julian __________________________________________________________________ From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on behalf of Jeff Detrich <[3]jjdetrich at gmail.com> Sent: Friday, December 20, 2019 2:07 PM To: [4]detomaso at server.detomasolist.com <[5]detomaso at server.detomasolist.com> Cc: Mike 01Ditucci <[6]ditucci at att.net> Subject: [DeTomaso] New Fuel Injection recommendations A I'm finally going to upgrade to a new FI system. Car goes in to our local Pantera guru, Mike Ditucci, next week. I'm currently using an Electromotive system with a single Holley style throttle body and sequential injection at each inlet valve. I would like to keep that setup but upgrade to new well supported system that runs autonomously, ie, self learning. Would appreciate any recommendations, thanks. Happy Holidays, Jeff Detrich 6559References 1. mailto:julian_kift at hotmail.com 2. mailto:detomaso-bounces at server.detomasolist.com 3. mailto:jjdetrich at gmail.com 4. mailto:detomaso at server.detomasolist.com 5. mailto:detomaso at server.detomasolist.com 6. mailto:ditucci at att.net_______________________________________________Detomaso Email List is not managed by POCAPosted emails must not exceed 1.5 MegabytesDeTomaso mailing listDeTomaso at server.detomasolist.comhttp://server.detomasolist.com/mailman/listinfo/detomasoTo manage your subscription (change email address, unsubscribe, etc.) use the links above.Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. You can go here and download the free FAST XFI C-COM 2.0 software: [1]https://www.fuelairspark.com/software-downloads If you install it, you can go to: HELP: INDEX and get a massive amount of information. You can connect the ECU to the internet and use remote turning services so you don't need to rely on local support to fix issues, and it is suppose to be self learning. There is a Facebook group and the Comp Cams FAST forum: [2]http://www.cpgnation.com/forum/forums/fast-support-forum.235/ Still installing, so no personal experience. Some people like the Holley system better so you might want to look into it. Ken On Friday, December 20, 2019, 2:50:35 PM PST, Jeff Detrich <jjdetrich at gmail.com> wrote: Thanks fur responding Julian. My car starts and runs, but not great. My Electromotive TEC3a doesn't have a workable idle control valve circuit which I need with a Holley style throttle body - we've tuned around that problem but still not very good, still uses an old PC serial connection, requires experts to program and modify (which don't exist here in Dallas), and their support was horrible until I just gave up. I needA something that is reliable, supportable and supported here. I'm tired of apologizing for it. I do realize that a new system will not be as flexible and controllable as the TEC3a but I've had it for 13 years and it's the same old same old. I'm generalizing here but guys with the new systems just plug it in and it goes.A I know you've recommended FAST in the past and I will look at them to see if they are self learning. My recollection of it from 10 years ago is that is similar to the TEC3a but I'm not sure if it has been redone into a more modern system? Jeff On Fri, Dec 20, 2019 at 4:15 PM Julian Kift <[1][3]julian_kift at hotmail.com> wrote: Why? What benefits are you expecting over those the Electromotive ECU can't offer? Julian __________________________________________________________________ From: DeTomaso <[2][4]detomaso-bounces at server.detomasolist.com> on behalf of Jeff Detrich <[3][5]jjdetrich at gmail.com> Sent: Friday, December 20, 2019 2:07 PM To: [4][6]detomaso at server.detomasolist.com <[5][7]detomaso at server.detomasolist.com> Cc: Mike 01Ditucci <[6][8]ditucci at att.net> Subject: [DeTomaso] New Fuel Injection recommendations A I'm finally going to upgrade to a new FI system. Car goes in to our local Pantera guru, Mike Ditucci, next week. I'm currently using an Electromotive system with a single Holley style throttle body and sequential injection at each inlet valve. I would like to keep that setup but upgrade to new well supported system that runs autonomously, ie, self learning. Would appreciate any recommendations, thanks. Happy Holidays, Jeff Detrich 6559 References 1. mailto:[9]julian_kift at hotmail.com 2. mailto:[10]detomaso-bounces at server.detomasolist.com 3. mailto:[11]jjdetrich at gmail.com 4. mailto:[12]detomaso at server.detomasolist.com 5. mailto:[13]detomaso at server.detomasolist.com 6. mailto:[14]ditucci at att.net _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [15]DeTomaso at server.detomasolist.com [16]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.References 1. https://www.fuelairspark.com/software-downloads 2. http://www.cpgnation.com/forum/forums/fast-support-forum.235/ 3. mailto:julian_kift at hotmail.com 4. mailto:detomaso-bounces at server.detomasolist.com 5. mailto:jjdetrich at gmail.com 6. mailto:detomaso at server.detomasolist.com 7. mailto:detomaso at server.detomasolist.com 8. mailto:ditucci at att.net 9. mailto:julian_kift at hotmail.com 10. mailto:detomaso-bounces at server.detomasolist.com 11. mailto:jjdetrich at gmail.com 12. mailto:detomaso at server.detomasolist.com 13. mailto:detomaso at server.detomasolist.com 14. mailto:ditucci at att.net 15. mailto:DeTomaso at server.detomasolist.com 16. http://server.detomasolist.com/mailman/listinfo/detomaso_______________________________________________Detomaso Email List is not managed by POCAPosted emails must not exceed 1.5 MegabytesDeTomaso mailing listDeTomaso at server.detomasolist.comhttp://server.detomasolist.com/mailman/listinfo/detomasoTo manage your subscription (change email address, unsubscribe, etc.) use the links above.Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Ken, or you could install a 750 DP
Cheers
Bill Moore
Calgary
4038604300
-------- Original message --------
From: Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Date: 12/20/19 4:33 PM (GMT-07:00)
To: Julian Kift <julian_kift at hotmail.com>, Jeff Detrich
<jjdetrich at gmail.com>
Cc: detomaso at server.detomasolist.com, Mike 01Ditucci <ditucci at att.net>
Subject: Re: [DeTomaso] New Fuel Injection recommendations
You can go here and download the free FAST XFI C-COM 2.0 software:
https://www.fuelairspark.com/software-downloads
If you install it, you can go to:
HELP: INDEX
and get a massive amount of information.
You can connect the ECU to the internet and use remote turning services
so you don't need to rely on local support to fix issues, and it is
suppose to be self learning. There is a Facebook group and the Comp
Cams FAST forum:
http://www.cpgnation.com/forum/forums/fast-support-forum.235/
Still installing, so no personal experience.
Some people like the Holley system better so you might want to look
into it.
Ken
On Friday, December 20, 2019, 2:50:35 PM PST, Jeff Detrich
<jjdetrich at gmail.com> wrote:
Thanks fur responding Julian. My car starts and runs, but not great.
My
Electromotive TEC3a doesn't have a workable idle control valve
circuit
which I need with a Holley style throttle body - we've tuned around
that problem but still not very good, still uses an old PC serial
connection, requires experts to program and modify (which don't exist
here in Dallas), and their support was horrible until I just gave up.
I
needA something that is reliable, supportable and supported here. I'm
tired of apologizing for it. I do realize that a new system will not
be
as flexible and controllable as the TEC3a but I've had it for 13
years
and it's the same old same old. I'm generalizing here but guys with
the
new systems just plug it in and it goes.A
I know you've recommended FAST in the past and I will look at them to
see if they are self learning. My recollection of it from 10 years
ago
is that is similar to the TEC3a but I'm not sure if it has been
redone
into a more modern system?
Jeff
On Fri, Dec 20, 2019 at 4:15 PM Julian Kift
<[1]julian_kift at hotmail.com> wrote:
Why? What benefits are you expecting over those the Electromotive ECU
can't offer?
Julian
__________________________________________________________________
From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on
behalf
of Jeff Detrich <[3]jjdetrich at gmail.com>
Sent: Friday, December 20, 2019 2:07 PM
To: [4]detomaso at server.detomasolist.com
<[5]detomaso at server.detomasolist.com>
Cc: Mike 01Ditucci <[6]ditucci at att.net>
Subject: [DeTomaso] New Fuel Injection recommendations
A
I'm finally going to upgrade to a new FI system. Car goes in to our
local
Pantera guru, Mike Ditucci, next week.
I'm currently using an Electromotive system with a single Holley
style
throttle body and sequential injection at each inlet valve. I would
like to
keep that setup but upgrade to new well supported system that runs
autonomously, ie, self learning.
Would appreciate any recommendations, thanks.
Happy Holidays,
Jeff Detrich
6559
References
1. mailto:julian_kift at hotmail.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:jjdetrich at gmail.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:detomaso at server.detomasolist.com
6. mailto:ditucci at att.net
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
You can go here and download the free FAST XFI C-COM 2.0 software:
[1]https://www.fuelairspark.com/software-downloads
If you install it, you can go to:
HELP:
INDEX
and get a massive amount of information.
You can connect the ECU to the internet and use remote turning
services
so you don't need to rely on local support to fix issues, and it is
suppose to be self learning. There is a Facebook group and the Comp
Cams FAST forum:
[2]http://www.cpgnation.com/forum/forums/fast-support-forum.235/
Still installing, so no personal experience.
Some people like the Holley system better so you might want to look
into it.
Ken
On Friday, December 20, 2019, 2:50:35 PM PST, Jeff Detrich
<jjdetrich at gmail.com> wrote:
Thanks fur responding Julian. My car starts and runs, but not
great.
My
Electromotive TEC3a doesn't have a workable idle control valve
circuit
which I need with a Holley style throttle body - we've tuned
around
that problem but still not very good, still uses an old PC serial
connection, requires experts to program and modify (which don't
exist
here in Dallas), and their support was horrible until I just gave
up.
I
needA something that is reliable, supportable and supported here.
I'm
tired of apologizing for it. I do realize that a new system will
not
be
as flexible and controllable as the TEC3a but I've had it for 13
years
and it's the same old same old. I'm generalizing here but guys
with
the
new systems just plug it in and it goes.A
I know you've recommended FAST in the past and I will look at them
to
see if they are self learning. My recollection of it from 10 years
ago
is that is similar to the TEC3a but I'm not sure if it has been
redone
into a more modern system?
Jeff
On Fri, Dec 20, 2019 at 4:15 PM Julian Kift
<[1][3]julian_kift at hotmail.com> wrote:
Why? What benefits are you expecting over those the Electromotive
ECU
can't offer?
Julian
__________________________________________________________________
From: DeTomaso <[2][4]detomaso-bounces at server.detomasolist.com> on
behalf
of Jeff Detrich <[3][5]jjdetrich at gmail.com>
Sent: Friday, December 20, 2019 2:07 PM
To: [4][6]detomaso at server.detomasolist.com
<[5][7]detomaso at server.detomasolist.com>
Cc: Mike 01Ditucci <[6][8]ditucci at att.net>
Subject: [DeTomaso] New Fuel Injection recommendations
A
I'm finally going to upgrade to a new FI system. Car goes in to
our
local
Pantera guru, Mike Ditucci, next week.
I'm currently using an Electromotive system with a single Holley
style
throttle body and sequential injection at each inlet valve. I
would
like to
keep that setup but upgrade to new well supported system that runs
autonomously, ie, self learning.
Would appreciate any recommendations, thanks.
Happy Holidays,
Jeff Detrich
6559
References
1. mailto:[9]julian_kift at hotmail.com
2. mailto:[10]detomaso-bounces at server.detomasolist.com
3. mailto:[11]jjdetrich at gmail.com
4. mailto:[12]detomaso at server.detomasolist.com
5. mailto:[13]detomaso at server.detomasolist.com
6. mailto:[14]ditucci at att.net
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[15]DeTomaso at server.detomasolist.com
[16]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. https://www.fuelairspark.com/software-downloads
2. http://www.cpgnation.com/forum/forums/fast-support-forum.235/
3. mailto:julian_kift at hotmail.com
4. mailto:detomaso-bounces at server.detomasolist.com
5. mailto:jjdetrich at gmail.com
6. mailto:detomaso at server.detomasolist.com
7. mailto:detomaso at server.detomasolist.com
8. mailto:ditucci at att.net
9. mailto:julian_kift at hotmail.com
10. mailto:detomaso-bounces at server.detomasolist.com
11. mailto:jjdetrich at gmail.com
12. mailto:detomaso at server.detomasolist.com
13. mailto:detomaso at server.detomasolist.com
14. mailto:ditucci at att.net
15. mailto:DeTomaso at server.detomasolist.com
16. http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
More information about the DeTomaso
mailing list