[DeTomaso] New Fuel Injection recommendations

[Jeff Detrich]

Thanks fur responding Julian. My car starts and runs, but not great. My
Electromotive TEC3a doesn't have a workable idle control valve circuit
which I need with a Holley style throttle body - we've tuned around that
problem but still not very good, still uses an old PC serial connection,
requires experts to program and modify (which don't exist here in Dallas),
and their support was horrible until I just gave up. I need something that
is reliable, supportable and supported here. I'm tired of apologizing for
it. I do realize that a new system will not be as flexible and controllable
as the TEC3a but I've had it for 13 years and it's the same old same old.
I'm generalizing here but guys with the new systems just plug it in and it
goes.

I know you've recommended FAST in the past and I will look at them to see
if they are self learning. My recollection of it from 10 years ago is that
is similar to the TEC3a but I'm not sure if it has been redone into a more
modern system?

Jeff

On Fri, Dec 20, 2019 at 4:15 PM Julian Kift <julian_kift at hotmail.com> wrote:

> Why? What benefits are you expecting over those the Electromotive ECU
> can't offer?
>
> Julian
>
> ------------------------------
> *From:* DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
> Jeff Detrich <jjdetrich at gmail.com>
> *Sent:* Friday, December 20, 2019 2:07 PM
> *To:* detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
> *Cc:* Mike 01Ditucci <ditucci at att.net>
> *Subject:* [DeTomaso] New Fuel Injection recommendations
>
> I'm finally going to upgrade to a new FI system. Car goes in to our local
> Pantera guru, Mike Ditucci, next week.
>
> I'm currently using an Electromotive system with a single Holley style
> throttle body and sequential injection at each inlet valve. I would like to
> keep that setup but upgrade to new well supported system that runs
> autonomously, ie, self learning.
>
> Would appreciate any recommendations, thanks.
>
> Happy Holidays,
>
> Jeff Detrich
> 6559
>
-------------- next part --------------
   Thanks fur responding Julian. My car starts and runs, but not great. My
   Electromotive TEC3a doesn't have a workable idle control valve circuit
   which I need with a Holley style throttle body - we've tuned around
   that problem but still not very good, still uses an old PC serial
   connection, requires experts to program and modify (which don't exist
   here in Dallas), and their support was horrible until I just gave up. I
   needA something that is reliable, supportable and supported here. I'm
   tired of apologizing for it. I do realize that a new system will not be
   as flexible and controllable as the TEC3a but I've had it for 13 years
   and it's the same old same old. I'm generalizing here but guys with the
   new systems just plug it in and it goes.A
   I know you've recommended FAST in the past and I will look at them to
   see if they are self learning. My recollection of it from 10 years ago
   is that is similar to the TEC3a but I'm not sure if it has been redone
   into a more modern system?
   Jeff

   On Fri, Dec 20, 2019 at 4:15 PM Julian Kift
   <[1]julian_kift at hotmail.com> wrote:

   Why? What benefits are you expecting over those the Electromotive ECU
   can't offer?
   Julian
     __________________________________________________________________

   From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on behalf
   of Jeff Detrich <[3]jjdetrich at gmail.com>
   Sent: Friday, December 20, 2019 2:07 PM
   To: [4]detomaso at server.detomasolist.com
   <[5]detomaso at server.detomasolist.com>
   Cc: Mike 01Ditucci <[6]ditucci at att.net>
   Subject: [DeTomaso] New Fuel Injection recommendations
   A
   I'm finally going to upgrade to a new FI system. Car goes in to our
   local
   Pantera guru, Mike Ditucci, next week.
   I'm currently using an Electromotive system with a single Holley style
   throttle body and sequential injection at each inlet valve. I would
   like to
   keep that setup but upgrade to new well supported system that runs
   autonomously, ie, self learning.
   Would appreciate any recommendations, thanks.
   Happy Holidays,
   Jeff Detrich
   6559

References

   1. mailto:julian_kift at hotmail.com
   2. mailto:detomaso-bounces at server.detomasolist.com
   3. mailto:jjdetrich at gmail.com
   4. mailto:detomaso at server.detomasolist.com
   5. mailto:detomaso at server.detomasolist.com
   6. mailto:ditucci at att.net