[DeTomaso] Cold air inlet idea

[Dave Londry]

Hey that was fun!!
And I know that was a professional driver on a closed course (decorated 
to look like a Washington State Hwy).
Dave

On 2019-12-04 6:26 p.m., Matt Wells wrote:
>     Well Rich I was curious too.
>     So I did my own little test. After an earlier discuss on the same
>     subject.
>     Please excuse the tilted view as I just slapped on my gopro without
>     thinking.A
>     Just tilt your head a little to the right ;-)
>     I don't know if I proved anything after looking at the little yarn
>     pieces flapping around at 120mph
>     but my untrained eye tells me there is fur shur air moving towards the
>     back of the car at the gill surface!
>     Anyway I had fun doing it. Let me know if the video/link doesn't work
>     and I'll resend another corny version already on Utoob.
>     Good luck on the project.
>     Matt
>     [1]https://youtu.be/rLZpP-eY_9oA
>
>     On Wed, Dec 4, 2019 at 1:42 PM Rich Hoppe <[2]richbhoppe at gmail.com>
>     wrote:
>
>       A  A Just curious if anyone has tried to cut slots in the side grill
>       then
>       A  A slots in body behind Grill then hole in inner panel to install
>       a cold
>       A  A air tube to air cleaner.
>       A  A I know kind of an out of the box idea but I don't think the
>       slots in
>       A  A the Grill would affect the look of the car as much as the
>       scoops.
>       A  A HasA anyone been successful cutting the side Grills without
>       breaking
>       A  A them?
>       A  A thanks Rich
>       _______________________________________________
>       Detomaso Email List is not managed by POCA
>       Posted emails must not exceed 1.5 Megabytes
>       DeTomaso mailing list
>       [3]DeTomaso at server.detomasolist.com
>       [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>       To manage your subscription (change email address, unsubscribe,
>       etc.) use the links above.
>       Members who post to this list grant license to the list to forward
>       any message posted here to all past, current, or future members of
>       the list. They also grant the list owner permission to maintain an
>       archive or approve the archiving of list messages.
>
> References
>
>     1. https://youtu.be/rLZpP-eY_9o
>     2. mailto:richbhoppe at gmail.com
>     3. mailto:DeTomaso at server.detomasolist.com
>     4. http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-- 
Dave Londry
TRGuys.com

davel at trguys.com
Cell     604-721-2278
Landline 604-589-9182
Skype    embeddedspaces

-------------- next part --------------
   Hey that was fun!!
   And I know that was a professional driver on a closed course (decorated
   to look like a Washington State Hwy).
   Dave

   On 2019-12-04 6:26 p.m., Matt Wells wrote:

   Well Rich I was curious too.
   So I did my own little test. After an earlier discuss on the same
   subject.
   Please excuse the tilted view as I just slapped on my gopro without
   thinking.A
   Just tilt your head a little to the right ;-)
   I don't know if I proved anything after looking at the little yarn
   pieces flapping around at 120mph
   but my untrained eye tells me there is fur shur air moving towards the
   back of the car at the gill surface!
   Anyway I had fun doing it. Let me know if the video/link doesn't work
   and I'll resend another corny version already on Utoob.
   Good luck on the project.
   Matt
   [1][1]https://youtu.be/rLZpP-eY_9oA

   On Wed, Dec 4, 2019 at 1:42 PM Rich Hoppe [2]<[2]richbhoppe at gmail.com>
   wrote:

     A  A Just curious if anyone has tried to cut slots in the side grill
     then
     A  A slots in body behind Grill then hole in inner panel to install
     a cold
     A  A air tube to air cleaner.
     A  A I know kind of an out of the box idea but I don't think the
     slots in
     A  A the Grill would affect the look of the car as much as the
     scoops.
     A  A HasA anyone been successful cutting the side Grills without
     breaking
     A  A them?
     A  A thanks Rich
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [[3]3]DeTomaso at server.detomasolist.com
     [4][4]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. [5]https://youtu.be/rLZpP-eY_9o
   2. [6]mailto:richbhoppe at gmail.com
   3. [7]mailto:DeTomaso at server.detomasolist.com
   4. [8]http://server.detomasolist.com/mailman/listinfo/detomaso


_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[9]DeTomaso at server.detomasolist.com
[10]http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.

Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.

--
Dave Londry
TRGuys.com

[11]davel at trguys.com
Cell     604-721-2278
Landline 604-589-9182
Skype    embeddedspaces

References

   1. https://youtu.be/rLZpP-eY_9oA
   2. mailto:[2]richbhoppe at gmail.com
   3. mailto:3]DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso
   5. https://youtu.be/rLZpP-eY_9o
   6. mailto:richbhoppe at gmail.com
   7. mailto:DeTomaso at server.detomasolist.com
   8. http://server.detomasolist.com/mailman/listinfo/detomaso
   9. mailto:DeTomaso at server.detomasolist.com
  10. http://server.detomasolist.com/mailman/listinfo/detomaso
  11. mailto:davel at trguys.com