[DeTomaso] Deck-lid Striker Plate

[Rob DuMoulin]

Hall has them for $20.  No brainer.  What broke?  In the middle or around
the bolt holes?

http://hallpantera.com/cgi-bin/p/awtp-product-category.cgi?d=hallpantera-inc&pc=7359



Rob DuMoulin
904.476.8744
rob at dumoulins.net
www.kbsi.co
http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58


On Tue, Apr 23, 2019 at 1:10 PM Jack Donahue <demongusta at gmail.com> wrote:

> To All:
> I installed new deck-lid shocks which apparently are VERY strong as the
> deck-lid wants to "fly open" and the gap between the body and lid increased
> a few millimeters - anyway, my striker plate broke and made my outing a
> "Bat-mobile" drive - embarrassing.
> Are striker plates an easy-order? Or - do I find a welder and try to
> salvage what I have?
> Thank you,
> Jack #4348
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
-------------- next part --------------
   Hall has them for $20.A  No brainer.A  What broke?A  In the middle or
   around the bolt holes?
   [1]http://hallpantera.com/cgi-bin/p/awtp-product-category.cgi?d=hallpan
   tera-inc&pc=7359A
   Rob DuMoulin
   904.476.8744
   [2]rob at dumoulins.net
   [3]www.kbsi.co
   [4]http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58

   On Tue, Apr 23, 2019 at 1:10 PM Jack Donahue <[5]demongusta at gmail.com>
   wrote:

     To All:
     I installed new deck-lid shocks which apparently are VERY strong as
     the deck-lid wants to "fly open" and the gap between the body and
     lid increased a few millimeters - anyway, my striker plate broke and
     made my outing a "Bat-mobile" drive - embarrassing.
     Are striker plates an easy-order? Or - do I find a welder and try to
     salvage what I have?
     Thank you,
     Jack #4348
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [6]DeTomaso at server.detomasolist.com
     [7]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. http://hallpantera.com/cgi-bin/p/awtp-product-category.cgi?d=hallpantera-inc&pc=7359
   2. mailto:rob at dumoulins.net
   3. http://www.kbsi.co/
   4. http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
   5. mailto:demongusta at gmail.com
   6. mailto:DeTomaso at server.detomasolist.com
   7. http://server.detomasolist.com/mailman/listinfo/detomaso