[DeTomaso] Johnny Woods Engine Bay Workbench

Rob DuMoulin rob at dumoulins.net
Tue Apr 23 08:54:17 EDT 2019 

+1 for me.

Rob



On Mon, Apr 22, 2019 at 10:57 AM Mike Drew via DeTomaso <
detomaso at server.detomasolist.com> wrote:

>    It was actually designed specifically to work with that bar. We made 40
>    of them last time. We would have to have an order at least that size to
>    make it worthwhile. As it is, we lost money on the project. But it was
>    fun!
>
>    Mike
>    Sent from my iPad
>    On Apr 22, 2019, at 07:49, Vinh Ly <[1]vinh.d.ly at gmail.com> wrote:
>
>    Mike,
>    I think I have the aftermarket fat bar that has the center adjusting
>    nut?  Would it work with that?  If so you can put me down for 2
>    benches.
>    Regards,
>    Vinh
>    On Mon, Apr 22, 2019, 10:28 Mike Drew <[2]MikeLDrew at aol.com> wrote:
>
>      Johnny and I made them together at my house, and he left me the jig
>      used to create them. If there was enough interest perhaps we could
>      make another production run?
>      I would modify the front to do away with the 90-degree angles in
>      exchange for a 45-degree bend, so it would clear the chassis
>      stiffening kits that weren't around back then.....
>      Mike
>      Sent from my iPad
>      > On Apr 21, 2019, at 14:16, Vinh Ly <[3]vinh.d.ly at gmail.com> wrote:
>      >
>      > Johnny Woods is no longer making them (pics attached).  Anybody
>      have one that they want to sell or know how I can get one?
>      >
>      > Regards,
>      > Vinh
>      >
>      > <image1.jpeg>
>      >
>      >
>      > <image2.jpeg>
>      >
>      > _______________________________________________
>      >
>      >
>      > Detomaso Email List is not managed by POCA
>      > Posted emails must not exceed 1.5 Megabytes
>      > DeTomaso mailing list
>      > [4]DeTomaso at server.detomasolist.com
>      > [5]http://server.detomasolist.com/mailman/listinfo/detomaso
>      >
>      > To manage your subscription (change email address, unsubscribe,
>      etc.) use the links above.
>      >
>      > Members who post to this list grant license to the list to forward
>      any message posted here to all past, current, or future members of
>      the list. They also grant the list owner permission to maintain an
>      archive or approve the archiving of list messages.
>
> References
>
>    1. mailto:vinh.d.ly at gmail.com
>    2. mailto:MikeLDrew at aol.com
>    3. mailto:vinh.d.ly at gmail.com
>    4. mailto:DeTomaso at server.detomasolist.com
>    5. http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
   +1 for me.
   RobA

   On Mon, Apr 22, 2019 at 10:57 AM Mike Drew via DeTomaso
   <[1]detomaso at server.detomasolist.com> wrote:

     A  A It was actually designed specifically to work with that bar. We
     made 40
     A  A of them last time. We would have to have an order at least that
     size to
     A  A make it worthwhile. As it is, we lost money on the project. But
     it was
     A  A fun!
     A  A Mike
     A  A Sent from my iPad
     A  A On Apr 22, 2019, at 07:49, Vinh Ly <[1][2]vinh.d.ly at gmail.com>
     wrote:
     A  A Mike,
     A  A I think I have the aftermarket fat bar that has the center
     adjusting
     A  A nut?A  Would it work with that?A  If so you can put me down for
     2
     A  A benches.
     A  A Regards,
     A  A Vinh
     A  A On Mon, Apr 22, 2019, 10:28 Mike Drew <[2][3]MikeLDrew at aol.com>
     wrote:
     A  A  A Johnny and I made them together at my house, and he left me
     the jig
     A  A  A used to create them. If there was enough interest perhaps we
     could
     A  A  A make another production run?
     A  A  A I would modify the front to do away with the 90-degree
     angles in
     A  A  A exchange for a 45-degree bend, so it would clear the chassis
     A  A  A stiffening kits that weren't around back then.....
     A  A  A Mike
     A  A  A Sent from my iPad
     A  A  A > On Apr 21, 2019, at 14:16, Vinh Ly
     <[3][4]vinh.d.ly at gmail.com> wrote:
     A  A  A >
     A  A  A > Johnny Woods is no longer making them (pics attached).A
     Anybody
     A  A  A have one that they want to sell or know how I can get one?
     A  A  A >
     A  A  A > Regards,
     A  A  A > Vinh
     A  A  A >
     A  A  A > <image1.jpeg>
     A  A  A >
     A  A  A >
     A  A  A > <image2.jpeg>
     A  A  A >
     A  A  A > _______________________________________________
     A  A  A >
     A  A  A >
     A  A  A > Detomaso Email List is not managed by POCA
     A  A  A > Posted emails must not exceed 1.5 Megabytes
     A  A  A > DeTomaso mailing list
     A  A  A > [4][5]DeTomaso at server.detomasolist.com
     A  A  A >
     [5][6]http://server.detomasolist.com/mailman/listinfo/detomaso
     A  A  A >
     A  A  A > To manage your subscription (change email address,
     unsubscribe,
     A  A  A etc.) use the links above.
     A  A  A >
     A  A  A > Members who post to this list grant license to the list to
     forward
     A  A  A any message posted here to all past, current, or future
     members of
     A  A  A the list. They also grant the list owner permission to
     maintain an
     A  A  A archive or approve the archiving of list messages.
     References
     A  A 1. mailto:[7]vinh.d.ly at gmail.com
     A  A 2. mailto:[8]MikeLDrew at aol.com
     A  A 3. mailto:[9]vinh.d.ly at gmail.com
     A  A 4. mailto:[10]DeTomaso at server.detomasolist.com
     A  A 5. [11]http://server.detomasolist.com/mailman/listinfo/detomaso
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [12]DeTomaso at server.detomasolist.com
     [13]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:detomaso at server.detomasolist.com
   2. mailto:vinh.d.ly at gmail.com
   3. mailto:MikeLDrew at aol.com
   4. mailto:vinh.d.ly at gmail.com
   5. mailto:DeTomaso at server.detomasolist.com
   6. http://server.detomasolist.com/mailman/listinfo/detomaso
   7. mailto:vinh.d.ly at gmail.com
   8. mailto:MikeLDrew at aol.com
   9. mailto:vinh.d.ly at gmail.com
  10. mailto:DeTomaso at server.detomasolist.com
  11. http://server.detomasolist.com/mailman/listinfo/detomaso
  12. mailto:DeTomaso at server.detomasolist.com
  13. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list