[DeTomaso] Johnny Woods Engine Bay Workbench

[Mike Drew]

It was actually designed specifically to work with that bar. We made 40 of them last time. We would have to have an order at least that size to make it worthwhile. As it is, we lost money on the project. But it was fun!

Mike

Sent from my iPad

> On Apr 22, 2019, at 07:49, Vinh Ly <vinh.d.ly at gmail.com> wrote:
> 
> Mike,
> 
> I think I have the aftermarket fat bar that has the center adjusting nut?  Would it work with that?  If so you can put me down for 2 benches.
> 
> Regards,
> Vinh 
> 
> 
>> On Mon, Apr 22, 2019, 10:28 Mike Drew <MikeLDrew at aol.com> wrote:
>> Johnny and I made them together at my house, and he left me the jig used to create them. If there was enough interest perhaps we could make another production run?
>> 
>> I would modify the front to do away with the 90-degree angles in exchange for a 45-degree bend, so it would clear the chassis stiffening kits that weren’t around back then.....
>> 
>> Mike
>> 
>> Sent from my iPad
>> 
>> > On Apr 21, 2019, at 14:16, Vinh Ly <vinh.d.ly at gmail.com> wrote:
>> > 
>> > Johnny Woods is no longer making them (pics attached).  Anybody have one that they want to sell or know how I can get one?
>> > 
>> > Regards,
>> > Vinh
>> > 
>> > <image1.jpeg>
>> > 
>> > 
>> > <image2.jpeg>
>> > 
>> > _______________________________________________
>> > 
>> > 
>> > Detomaso Email List is not managed by POCA
>> > Posted emails must not exceed 1.5 Megabytes
>> > DeTomaso mailing list
>> > DeTomaso at server.detomasolist.com
>> > http://server.detomasolist.com/mailman/listinfo/detomaso
>> > 
>> > To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> > 
>> > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>> 
-------------- next part --------------
   It was actually designed specifically to work with that bar. We made 40
   of them last time. We would have to have an order at least that size to
   make it worthwhile. As it is, we lost money on the project. But it was
   fun!

   Mike
   Sent from my iPad
   On Apr 22, 2019, at 07:49, Vinh Ly <[1]vinh.d.ly at gmail.com> wrote:

   Mike,
   I think I have the aftermarket fat bar that has the center adjusting
   nut?  Would it work with that?  If so you can put me down for 2
   benches.
   Regards,
   Vinh
   On Mon, Apr 22, 2019, 10:28 Mike Drew <[2]MikeLDrew at aol.com> wrote:

     Johnny and I made them together at my house, and he left me the jig
     used to create them. If there was enough interest perhaps we could
     make another production run?
     I would modify the front to do away with the 90-degree angles in
     exchange for a 45-degree bend, so it would clear the chassis
     stiffening kits that weren't around back then.....
     Mike
     Sent from my iPad
     > On Apr 21, 2019, at 14:16, Vinh Ly <[3]vinh.d.ly at gmail.com> wrote:
     >
     > Johnny Woods is no longer making them (pics attached).  Anybody
     have one that they want to sell or know how I can get one?
     >
     > Regards,
     > Vinh
     >
     > <image1.jpeg>
     >
     >
     > <image2.jpeg>
     >
     > _______________________________________________
     >
     >
     > Detomaso Email List is not managed by POCA
     > Posted emails must not exceed 1.5 Megabytes
     > DeTomaso mailing list
     > [4]DeTomaso at server.detomasolist.com
     > [5]http://server.detomasolist.com/mailman/listinfo/detomaso
     >
     > To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     >
     > Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:vinh.d.ly at gmail.com
   2. mailto:MikeLDrew at aol.com
   3. mailto:vinh.d.ly at gmail.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso