[DeTomaso] Johnny Woods Engine Bay Workbench
Vinh Ly
vinh.d.ly at gmail.com
Mon Apr 22 10:49:05 EDT 2019
Mike,
I think I have the aftermarket fat bar that has the center adjusting nut?
Would it work with that? If so you can put me down for 2 benches.
Regards,
Vinh
On Mon, Apr 22, 2019, 10:28 Mike Drew <MikeLDrew at aol.com> wrote:
> Johnny and I made them together at my house, and he left me the jig used
> to create them. If there was enough interest perhaps we could make another
> production run?
>
> I would modify the front to do away with the 90-degree angles in exchange
> for a 45-degree bend, so it would clear the chassis stiffening kits that
> weren’t around back then.....
>
> Mike
>
> Sent from my iPad
>
> > On Apr 21, 2019, at 14:16, Vinh Ly <vinh.d.ly at gmail.com> wrote:
> >
> > Johnny Woods is no longer making them (pics attached). Anybody have one
> that they want to sell or know how I can get one?
> >
> > Regards,
> > Vinh
> >
> > <image1.jpeg>
> >
> >
> > <image2.jpeg>
> >
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
-------------- next part --------------
Mike,
I think I have the aftermarket fat bar that has the center adjusting
nut?A Would it work with that?A If so you can put me down for 2
benches.
Regards,
VinhA
On Mon, Apr 22, 2019, 10:28 Mike Drew <[1]MikeLDrew at aol.com> wrote:
Johnny and I made them together at my house, and he left me the jig
used to create them. If there was enough interest perhaps we could
make another production run?
I would modify the front to do away with the 90-degree angles in
exchange for a 45-degree bend, so it would clear the chassis
stiffening kits that werenat around back then.....
Mike
Sent from my iPad
> On Apr 21, 2019, at 14:16, Vinh Ly <[2]vinh.d.ly at gmail.com> wrote:
>
> Johnny Woods is no longer making them (pics attached).A Anybody
have one that they want to sell or know how I can get one?
>
> Regards,
> Vinh
>
> <image1.jpeg>
>
>
> <image2.jpeg>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [3]DeTomaso at server.detomasolist.com
> [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:MikeLDrew at aol.com
2. mailto:vinh.d.ly at gmail.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list