[DeTomaso] Torque spec for motor mount bolts in the block

[Joseph F. Byrd, Jr.]

My notes list those bolts as 7/16-14 X 1-1/2 (don't have grade)
A generic torque chart for grade 5 (6.8Klbs clamping) as 35 lubed and 50 dry
ft-lbs

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Mike & Elizabeth Thomas
Sent: Thursday, September 13, 2018 19:58 PM
To: 'Doug'; 'David & Michele'; DeTomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Torque spec for motor mount bolts in the block

That's quite a range.  Any idea why?

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Doug
Sent: Tuesday, September 11, 2018 7:12 PM
To: 'David & Michele' <sullivanabode at bigpond.com>;
DeTomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Torque spec for motor mount bolts in the block

The ford shop manual for my 1970 Mustang with a 351C says 35 to 60 ft-lbs
for the motor mount to engine block bolts.

Doug Braun
Blue 73L #5505

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of David & Michele
Sent: Tuesday, September 11, 2018 5:38 AM
To: DeTomaso at server.detomasolist.com
Subject: [DeTomaso] Torque spec for motor mount bolts in the block

Dear Forum Members,

Would anyone know the torque spec for the motor mount bolts in the block?

Dave