[DeTomaso] Torque spec for motor mount bolts in the block

[Mike & Elizabeth Thomas]

That's quite a range.  Any idea why?

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Doug
Sent: Tuesday, September 11, 2018 7:12 PM
To: 'David & Michele' <sullivanabode at bigpond.com>;
DeTomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Torque spec for motor mount bolts in the block

The ford shop manual for my 1970 Mustang with a 351C says 35 to 60 ft-lbs
for the motor mount to engine block bolts.

Doug Braun
Blue 73L #5505

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of David & Michele
Sent: Tuesday, September 11, 2018 5:38 AM
To: DeTomaso at server.detomasolist.com
Subject: [DeTomaso] Torque spec for motor mount bolts in the block

Dear Forum Members,

Would anyone know the torque spec for the motor mount bolts in the block?

Dave


---
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________


Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5
Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use
the links above.

Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.