[DeTomaso] Radiator

Larry Stock larrys at panteraparts.com
Mon Oct 29 11:06:54 EDT 2018


Actually Softened Tap water is best, then tap water, but that varies quite
a bit. Actually The worst thing you can use is DI water which promotes
electrolysis in your cooling system.

On 10/29/18, 7:38 AM, "DeTomaso on behalf of Steve"
<detomaso-bounces at server.detomasolist.com on behalf of steve at snclocks.com>
wrote:

>Wow - does anyone use tap water in their radiators???  DI water is less
>than a dollar a gallon!
>
>Stephen
>
>-----Original Message-----
>From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
>Behalf Of Jack DeRyke via DeTomaso
>Sent: Sunday, October 28, 2018 7:47 PM
>To: djenkins at vanguardtrailer.com; audionut at hushmail.com
>Cc: detomaso at server.detomasolist.com
>Subject: Re: [DeTomaso] Radiator
>
> Before you lay out cash to fix an aluminum radiator, check the water in
>your area. Some parts of the U.S, in spite of the best efforts of the
>EPA, has water that is almost as corrosive as Coco-Cola! Go to a swimming
>pool shop and get a roll of pH paper for about $2. Dip it in some tap
>water at your house- or wherever you'll be getting the water for your
>cooling system. Municipal water systems are all over the map and two
>houses next door to each other may have sources 100 miles apart. If a
>couple of quick tests show the pH is below 7.0, you MUST use an anti-acid
>additive like Larry Stock mentioned. If its really low, a sacrificial
>anode may be needed as well. Corvette shops have been dealing with this
>for 55 years and have everything in stock.
>
>Second thing to watch: the pressure in most of the cooling system is less
>than 15 psi, so using an 18" wrench to tighten fittings like the
>black-iron water piping in your house is guaranteed to split or strip
>soft aluminum bosses. Use teflon tape and a gentle hand when tightening
>things into aluminum.
>
>Finally, there a neat little test the Corvette guys have been using since
>the mid-'60s. They have ALL had aluminum radiators since the days of the
>split-window 'Vette, with few failures such as members of this Forum have
>described. Take a GOOD VOM, set on the lowest voltage range, put one lead
>in the coolant in the tank and ground the other lead. If you see more
>than about 70 millivolts, this is a measure of how fast your alloy parts
>are dissolving. If you get no reading, your VOM is too coarse in its
>ranges. Borrow one from a TV repair shop if you must. Mine cost $250 in
>1985- a $7.95 special from Harbor Freight simply will not work. Its like
>trying to use a yardstick to measure crank bearings.
>
>Last thought: Carrying extra weight around in your Pantera impacts tire
>life, gas mileage, acceleration, brakes, handling and a host of other
>things; it's not 'just for racers'. Good luck- J DeRyke
> 
> 
>-----Original Message-----
>From: djenkins at vanguardtrailer.com <djenkins at vanguardtrailer.com>
>To: audionut <audionut at hushmail.com>
>CC: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
>Sent: Sun, 28 Oct 2018 14:55
>Subject: Re: [DeTomaso] Radiator
>
>  Thanks John. Waiting to hear from the Rad shop if they can repair.
>  Dave
>  Sent from my Verizon LG Smartphone
>
>  ------ Original message------
>  From: [1]audionut at hushmail.com
>  Date: Sun, Oct 28, 2018 4:21 PM
>  To: [2]djenkins at vanguardtrailer.com;
>  Cc:
>  Subject:Re: [DeTomaso] Radiator
>  Hi Dave--
>  I also have a 73 (stock 351 w/Holley 650).  10 years ago, with simple
>  tools, I installed a Fluidyne aluminum radiator/lay down kit and 2
>  sucker fans.
>  I have driven it in hot weather, bumper to bumper traffic, you name
>  it--  the car has never even come close to overheating nor has it ever
>  leaked.
>  I change coolant every 2 years.
>  Best of luck!
>  John
>  73L #5909
>  Sent using Hushmail
>  On 10/27/2018 at 11:46 AM,[3] djenkins at vanguardtrailer.com wrote:
>
>    I might need a new radiator for my 73 pantera. Would appreciate
>    suggestions on a replacement.
>    Thanks,Dave
>    Sent from my Verizon LG Smartphone
>
>References
>
>  1. mailto:audionut at hushmail.com
>  2. mailto:djenkins at vanguardtrailer.com
>  3. mailto:%20djenkins at vanguardtrailer.com
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA Posted emails must not exceed
>1.5 Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.
>
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.




More information about the DeTomaso mailing list