[DeTomaso] Fabricated ZF side mounts
LARRY FINCH
fresnofinches at aol.com
Fri Nov 23 16:02:24 EST 2018
All,
Some of you may recall my queries some months ago about fabricating ZF side mounts for an early rear-mount car, such as 2511.
Thomas Tornblom was kind enough to provide photos of the mounts on his 9000-series car. I had been unaware of this design change but thought it was quite adaptable to 2511 and proceeded to have the fabricator at Denny Finn‘s restoration shop create a similar system.
I provided some 3“ x 3“ square tubing as a starting point for the removable mounts, the chassis mount fabrication was all done in house by Denny’s fabricator, Dan.
I am quite pleased with the finished product.
Larry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 125662 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20181123/d9254339/attachment.jpeg>
-------------- next part --------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.jpeg
Type: image/jpeg
Size: 106341 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20181123/d9254339/attachment-0001.jpeg>
-------------- next part --------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3.jpeg
Type: image/jpeg
Size: 174029 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20181123/d9254339/attachment-0002.jpeg>
-------------- next part --------------
Sent from me using a magic, handheld electronic gizmo.
More information about the DeTomaso
mailing list